Tips on how to polish the machine with your own hands

If your car has lost its original sheen,on its surface there were small scratches, chips, it is worth thinking about polishing the machine. It will not be difficult to do this. You can contact the car service center, where for a certain amount your car will be brought to a proper view. And you can use the recommendations on how to polish the machine with your own hands. So, let's try to give the paintwork a radiant appearance.

How to polish the machine with your own hands: evaluate the nature of the damage

First, make sure that the parts do not requirerepainting. Minor scratches, scrapes can be removed by yourself. If you use the method of abrasive polishing, then know that in the process removes the layer of enamel with a thickness of about 5 microns. The factory painting is made in the thickness of 100-150 microns, that is, you can use 10-15 polishing cycles and be sure that you will not reach the soil layer. To be completely sure that polishing does not wipe the enamel "up to the holes", measure the thickness of the paint in several places using a thickness gauge. If everything is fine, go to the polish selection.

How to polish the machine with your own hands: the choice of materials

In order to choose the right paste forpolishing, you should pay attention to the nature of the damage. If there is a grid of small scratches, then a restoring polish is needed - an abrasive and a mixture containing a reduced number of grinding particles. When deep scratches are well suited polishes with a color-enhancing effect. If the problem is in the clouded spots on the coating, then a restorative paste without grinding particles will suffice. In addition to polishing, you need to choose the correct grinding wheel. For each paste, it's your own. After polishing the coating becomes thinner and requires additional protection in the form of a special paste. It should be selected according to the color of your car.

How to polish the machine yourself: surface preparation

You picked up the right materials. But before you polish the machine yourself, you must first properly prepare it. First, wash and dry the car body. Remove traces of midges, bitumen and anticorrosion. You can use special formulations or ordinary white spirit. If you are polishing outdoors, then choose non-sunny weather, without rain, with a comfortable temperature. If possible, it is better to polish in a garage or a special box with a good hood. Provide good lighting, otherwise some defects may go unnoticed. Slot deep scratches and chips to the primer with a special tape.

How to polish the machine with your own hands: doing the work

Polishing can be done manually or with the help ofpower tools. With a manual method, the paste is applied to a special lint-free cloth and rubbed against the body. Then you need to wait some time to dry the composition and perform a circular alignment until the appearance of gloss. Pay attention to the specified time of drying on a jar of pasta. Observance of the recommendations will lead to a better result. Polishing the car on its own with deep scratches requires the use of additional tools. It is best to use a grinder, if you do not have it, then a drill with a special nozzle will do. Such polishing is performed first with an abrasive paste to remove strong scratches, then with a "soft" mixture to create a gloss. After polishing, apply a protective layer to the surface.

</ p>