Makita HR4001C puncher: specifications, user manual, reviews

Builders and home masters know that inAs a necessary tool during the work is a puncher. With him, the work is not so difficult, and to achieve the goal is much faster. However, when you visit a store, consumers often do not know how to choose a puncher that will last long, and it also turns out to be a quality one.

This tool can not be called cheap, soThis issue should be approached seriously. In the market today, the products of the Makita company HR4001C from this manufacturer are very popular.

Model description HR 4001 C

If you still do not know which modelperforator to choose, it is worthwhile to get acquainted with the option under the marking HR 4001 C. This version of the equipment is a device that can operate in one of two modes: chiselling and drilling with impact. When chiselling, you can make openings and shtroby, as well as remove the old tiles.

The equipment has an electronic control systemspeed of rotation. An additional advantage is the presence of a soft start function. Tool protection from breakage in case of wedging of the drill was provided by the manufacturer, providing the construction with a safety clutch.

Characteristics

Makita HR4001C perforator has outstandingtechnical characteristics, namely, quite impressive capacity, which is 1100 watts. The maximum impact force reaches 9.5 J. Vibration protection and a drill chuck in the construction there.

Before purchasing this model, you needpay attention to the weight, it is equal to 5.9 kg. The maximum drilling diameter of the crown is 105 mm. For many consumers, a rather important option is the reverse, it does not have this puncher.

The length of the cable is 5 m. When the unit is operated, the user will be able to adjust the speed of rotation. The frequency of impacts varies from 1350 to 2750 per minute. Before you buy a Makita HR4001C puncher, you should ask what the size of the device is. The length of the body is 468 mm.

Some experts are also interested in the frequencyrotation of the spindle, in this case it varies from 235 to 480 rpm. There is no vibration in this device. The maximum possible drilling diameter in concrete using a drill is 40 mm.

Reviews about the model

If you still do not know if it's worth itto buy a puncher Makita HR4001C, then you should read reviews about it. Consumers believe that this model has a number of features that are attractive for each master, among them:

• easy replacement of equipment;
• simple management;
• user-friendly operation.

As regards the first singularity, it is expressedin a dust-proof cartridge, which guarantees the possibility of a convenient change of working attachments. Even under high load conditions, reliable retention is ensured. The Makita HR4001C puncher, the characteristics of which were mentioned above and should be known to you before purchasing the goods, according to customers, has a simple management.

On the body is a sliderswitch that is recessed to protect against accidental switching. In the chiselling mode it is very convenient to use. We can not fail to mention the convenience of work. The Makita HR 4001 C rotary hammer has a D-shape, and it can be rotated through 360 °.

Additional features

You can not purchase a tool if you do notgot acquainted with its characteristics to the full. Among other features of the described model, it is possible to distinguish the cable and switch failure indicator, which is very convenient for operation and makes it possible to forget about the need to solve the above problems independently. The equipment allows the operator to install the bit in 12 positions.

On the wear of carbon brushes you can learnthanks to the light indication. The manufacturer also provided for the presence of a torque limiter. There is also an electronic stabilization system in the device. For the drilling mode, you can use the trigger switch.

Cost of consumables

Makita perforator, the price of which is 32900rubles, in the process of work may require consumables. Among others, it is necessary to distinguish an annular spring by 25 mm, its cost is only 10 rubles. But the clutch cover can be purchased for 130 rubles.

The clutch of the barrel costs more than 410 rubles. The release cover has a price of 130 rubles. Uretanovoy ring of 45 mm you can buy for 400 rubles. Quite expensive part is the cylinder assembly, it is sold at a cost of 2390 rubles. Perhaps you will need a crown for 68 mm concrete, you can buy it for 666 rubles. In this case we are talking about the product brand HAGWERT 562092. However, you can purchase such a printer and at a different cost - 538 rubles. In this case, the crown for 68 mm concrete has the following marking: "Kraton 1 04 02 010".

User's manual

Before you buy a punch, you mustmake sure that a suitable workplace has been prepared for him. It should be well lit and not cluttered. Otherwise, you will run the risk of injury. The power tool should not be used in an explosive atmosphere where flammable gas, dust and liquid are present.

The power tool acts as a source of sparks,which can cause ignition of fumes and dust. The Makita HR4001C perforator, the feedback you could read above, should be used with due consideration for electrical safety measures. To do this, the plugs must match the outlet. The first one should not be modified. Do not use a fuse with a grounded power tool. Reduce the risk of electric shock to the operator by using the original plugs and their corresponding sockets.

Additional recommendations

Do not expose the tool tomoisture and rain. If water enters the housing, this increases the risk of electric shock to a person. The Makita HR4001C rotary hammer, the instruction manual of which is provided in the kit, has a cord, and it should not be used for carrying the instrument. It is recommended to keep the cord away from oil, heat, moving parts and sharp edges. If you plan to operate equipment outside the premises, you should use an extension cord that is suitable for this. When using a cord designed for use outside the room, you reduce the risk of electric shock.

Conclusion

Makita perforator, the price of which mayseem to be overstated, is a modern high-tech tool with which you can solve many tasks in everyday life and when performing professional repairs. If you still do not know which model of such a device to purchase, then you should become more familiar with the technical specifications, because it is for them experts recommend choosing a punch. It is important to determine also the class of the device that you need.

Do not rush to acquire a professionaltechnique, if you plan to operate it only from time to time. It, of course, will meet all your requirements, but, probably, will have too impressive weight, which is quite difficult for a newcomer to cope with. However, it is important to pay attention not only to the characteristics, but also to the reputation of the manufacturer. The company "Makita" exists in the market for a long time, it has established itself as a supplier, which manufactures reliable equipment.