Jigsaw "Makita": review of two models

The jig saw must be in every house. With its help you can not only cut wood, metal or plastic, but also create the most real works of art. Hand-held jigsaws can cut openwork laces on any wooden parts, but the work is long and tedious. In 1946, the first electric jigsaw appeared. A certain Albert Kaufmann, an engineer by training, attached the blade to the sewing machine. Now it's much faster. The modern great-grandsons of a hybrid of a sewing machine and saw on the technical characteristics have left far ahead. But the principle of work remains the same: the blade is attached only on one side, and because of this is somewhat more coarse. It is not possible to make small reels like a hand-operated jig saw, but this tool is much faster, and much less effort is applied. Today we will tell about the jigsaw of "Makita", or rather about the two models of this brand. Professional, and the one that is suitable for a domestic craftsman.

Fret saw «Makita 4329K»

It is a compact and reliable tool. It is very convenient to work with. Rubber inserts are located on the staple-shaped handle, which make the grip of the tool very reliable and sure. On the side of the handle is a large trigger with a button for fixing the switching position. Its power is 450 watts with a range from 500 to 3100 beats per minute. It adapts to any material thanks to six speeds. Jigsaw "Makita 4329K" has an adjustable angle of operation with an amplitude of 45 degrees in both directions. The maximum depth of cut in the tree is 65 millimeters, and in steel 8 millimeters. For more accurate and accurate work with the tree there are three built-in modes of pendulum stroke of the blade. Jigsaw "Makita 4329K" was developed taking into account the balancing system with a counterweight. Due to this, it can boast of a 40% vibration reduction factor. The shavings are ejected through the injector, which is located at the rear of the casing. In the ejection window you can connect a vacuum cleaner, then the working room will remain clean.

Fret saw «Makita 4350FCT»

One of the most important qualities of a real persontool is high power, speed and comfort in operation. Jig saw "Makita 4350FCT" is an excellent tool for carpenters, carpenters and builders. The length of its stroke is 25 millimeters, while the maximum depth of cut along the tree is 135 millimeters, and for metal - ten millimeters. The model is equipped with an electronic speed control system with an adjustment range from 800 to 2800 beats per minute. The tool is mounted on a solid cast platform, which does not break and does not bend, constantly provides a smooth and high quality cut, which is especially important when working with valuable wood species. The company's patented quick-change saw blade system allows you to replace worn blades without a key and without wasting time.

A fan is built into the jig saw, so no sawdust,no other construction debris is deposited on the markings, and the diode light will help you work in low light conditions. In general, jig saw "Makita 4350FCT" is the embodiment of professional standard. A small weight, good balance, excellent ergonomics - all this makes him an ideal assistant.

</ p>