Colors stains for wood: choose any!

Any product made of wood must be carefullyprocessed by special means to protect it from various negative effects. To make the surface of a tree of a certain color and give it a texture, a special stain is used - stain. The colors of stains for wood are so diverse that you can easily choose a shade for any interior.

How does it work?

The effect of the erosion is achieved due to the fact thatwood has a non-uniform structure: the dye penetrates into fine fibers, respectively, after drying, the surface remains a pattern. After choosing the color of wood stains, it is worth taking care of fixing the treated surface with varnish or wax. By the way, for an accurate selection of a shade, you can mix them with each other. Typically, this dye is used in the restoration of furniture, when you need to refine its surface and give a certain color. This will emphasize the texture of the furniture. Interior items will have an expressive and presentable appearance.

How to apply?

The stain must be applied only to thedirt and dust surface, which must also be ground. The application is done by a wide brush, but you can also use a tampon or a nebulizer. By the way, the stain must be applied along the fibers of the tree. If the color turns out to be too juicy, slightly dissolve it with alcohol or acetone. Today you can choose the following colors of stains for wood: oak, teak, walnut, mahogany, rosewood. Depending on the degree of saturation required, it is possible to apply the dye in several layers.

What kinds are there?

Choosing the material for processing, it is worthnot only from the color of stains for wood, but also from their varieties. For example, the stain can be in the form of a powder, which must be diluted with water, and its concentration will depend on the color saturation. There are compounds based on resin or alcohol. Whichever type of stain is chosen, the surface of the wood must necessarily be prepared. If after applying the material on a water-based surface, moisture remains on the surface, it must be soaked with a dry cloth. The composition for alcohol is absorbed much more quickly and dries up just as quickly. Any of these species penetrates deep into the tree and protects it from decay.

What brands?

If finishing is required at the premium level, you canBuy materials under the brand Varathane, and here you will find everything: from the stain to the ground-conditioner. The line of stains is a wide choice of color solutions, and their composition is quite suitable even for floor tinting. Excellent oil and coatings for the tree of the brand Watco (Watko) have proved themselves. However, the most popular among buyers is the wood stain "Tikkurila": colors and affordable price are the main "chips" of this brand.

How much is?

Of course, every paint material has its ownFeatures ranging from color to cost. But if you want to purchase a more economical tool, wood stain will be the best choice. Colors, price, variety of brands make it so popular with buyers. For example, a non-aqueous stain Krafor with a capacity of 0.5 liters will cost only 89 rubles. And the acrylic material of Tikkurila brand will cost from 250 rubles for a can of 0.9 liters.