How to choose the right glue for ceramic tiles

In order for the ceramic tile to last a long timeand firmly kept on the surface, you need to pay attention to two important factors: firstly, the quality of the tile itself, and secondly, the glue for ceramic tiles, which will be used for laying.

Choosing an adhesive for ceramic tiles and porcelain stoneware, It is necessary to consider what humidity will be in the room, and on what basis the material will be laid. Also, when choosing an adhesive solution, one should take into account the price, availability and ease of use.

The modern market presents various adhesives forceramic tiles, which are suitable for different facing materials. Naturally, when using universal adhesive mixtures, the tile is easily glued to the base, but the question arises as to how durable and durable this laying will be.

If the installation of ceramic tiles occursnew construction, then it is possible to select the glue that will be ideally suited to the selected material and to the substrate. When installing tiles on the existing base of the floor or walls, you need to carefully prepare the surface, and then choose

An equal basis is this guarantee thatceramic tiles are firmly and securely adhered. In this case, a flat surface will save the consumption of the adhesive mixture. Since most manufacturers specify that the glue for ceramic tiles should not be laid with a layer of more than 5 mm, it is necessary to check the surface drops first and, if necessary, to straighten out any irregularities.

When choosing glue for ceramic tiles, it should be borne in mind,so that the lined surface will be exposed to moisture. If the styling is done in the bathroom, the waterproofing of the room is simply necessary. Otherwise, over time, water will penetrate through the microcracks in the joints of the seams, which will entail the destruction of the glue.

The format of ceramic tiles also hasimportant when choosing a glue mixture. Inexpensive adhesives can be suitable only for small-format tiles, the size is not more than 30 × 30 cm. For the facing material of large sizes, which will be laid in rooms with high humidity, special glue should be selected.

Particular attention should be paid to laying the mosaic. This is not a small format tile. On the adhesive mixture for it, it must be indicated that this type is used for gluing ceramic and glass mosaic. For such purposes, a special acrylic or cement fine glue is best.

When facing a ceramic tile "warm floor"also should be selected special glue. Since such a floor has constant temperature changes, cheap glue can break down after a while. It is better to use a special improved glue.

If the base for laying ceramic tilesis a cement screed, it is best to choose polymer cement based on latex. When the packing surface is a chipboard or plywood, then an adhesive solution with a high coefficient of elasticity is used. For example, polyurethane or epoxy adhesive.

</ p>