A bridal bouquet of satin ribbons. How to make an original bouquet of ribbons

A wedding bouquet of satin ribbons appeared only recently, but has already gained popularity among brides. He has significant advantages over his vegetable colleague:

• He will calmly endure the whole ceremony and celebration and will remain as beautiful.
• You can not be afraid to smear the dress with pollen.
• It can be stored for a long time to memory.

How to make a bouquet of brides from satin ribbons by yourself? With the help of these step-by-step lessons you can create your own unique composition.

A budget option

This bridal bouquet of satin ribbons, made by your own hands, will not strike at the purse, but with due diligence will look no less spectacular.

For production you need:

• tapes;
• wire,
• floristic ribbon;
• scissors;
• glue gun;
• decorative hairpins with pearls;
• tulip.

First we will prepare flowers. To do this, take a tape 1 m long, cut the edges at an angle. Thread the thread into the needle and set it aside, it will be needed later. Back off 20 cm and fold the tape with the letter "G". Fold the long piece of ribbon parallel to the short one, then bend it to make a square. Repeat this operation until at least 3 layers of fabric are obtained. Gently lift the squares and slide the long end of the tape into the gap between the layers of fabric. Pull it out on the wrong side of the flower. While holding the construction, pull lightly at the long end of the tape. The petals will begin to curl. When the first layer gets the desired shape, release the second one and twist it slightly. When the flower is ready, take a thread with a needle and sew it so it does not crumble. Surplus of tapes is not cut off.

Assembling a bouquet

• Screws the wire to the flowers. We close it with the remainder of the ribbon and wrap it around the floral tape.
• We collect flowers in a bouquet, it will be easier to work with them if we tie them together with an elastic band. We wrap all the stems with floral tape, then with decorative satin. The bottom of the stems can be zadekroirovat hairpin.
• Now tie the tulle with a knot around the bottom of the bouquet and wrap around it a few times. Secure it with decorative studs.

A bridal bouquet of satin ribbons. Master Class

Of course, this work will require a lot from youpatience and accuracy. But you will not only get a beautiful bouquet ball from satin ribbons, but you will also gain skills with which you can decorate any other wedding attributes or simply make beautiful things.

You will need:

• ribbons of different colors;
• base under a bouquet with lace;
• beads;
• artificial stamens;
• ball of foam plastic;
• wooden sticks (here used ordinary chopsticks);
• wire;
• Needles and threads;
• tailors needles;
• scissors;
• nippers;
• pins;
• glue gun.

Operating procedure

Here's how to make bouquets of ribbons (MK with photos see below):

• We make a skeleton: we ground the base leg with laces with wooden sticks for stability and we close with a satin ribbon. Inward glue ball of foam.
• We make a flower-outlet as shown in the photo: first we make 4 curved corners, sew them and tighten them.

• We make a lush middle of a flower on the basis of a simple nodule, wrap it with a wire, leave a long tail. Surplus fabrics are cut off.
• We take artificial stamens, bend them in half and reel. Also leave the tail of the wire.

• We collect flowers: in the first two rows there will be a middle of the tape, and on the upper flowers in the middle - stamens. Glue the wire so that the sockets do not crumble.
• We collect a bouquet. Glue the flowers in rows, leaving no space. Between them, you can add large pearls, and from the green ribbon fold the small petals to give the composition a naturalness.

Decoration of a bouquet's leg

• Sew a large bow from a white ribbon. Cut off the tips and lightly burn with a flame from the lighter so that the fabric does not pour.
• Now make 6 rectangles from the ribbon, sew them on the cut and on the side of it, then pull them off. Connect the resulting petals into one large flower, in the center, sew a large pearl.
• Glue both elements to the stem of the bouquet.

Luxury roses

What else can you make a bridal bouquet of satin ribbons with your own hands?

In this bouquet the main role is assigned to roses. They look great due to the fact that they are made on the basis of a cone.

For a bouquet it will be necessary:

• tapes;
• base for a bouquet and a ball of polystyrene;
• beads and rhinestones;
• glue gun;
• scissors;
• needle and thread;
• non-woven fabric;
• pencil, ruler, compasses.

Step-by-step instruction

How to make a bouquet of satin roses:

1. We glue a ball of foam plastic and a base with a foot, if necessary strengthen the latter with wooden sticks, decorate with ribbons.
2. We turn to making roses. For them, we need to cut a circle of nonwoven with a radius equal to the width of the ribbon for the flower. Then cut out the sector of the circle (1/6 part) and stitch the workpiece into a cone with a pair of stitches.
3. Fold the tip of the tape with a square, sew onthe center of the cone. Then bend the tape at an angle and stitch to the base (see photo). So we continue to move in a circle, making folds larger. When they begin to extend beyond the edges of the base, cut off the tape, fix the end on the wrong side. The edges of the petals bend and sew to the fleece.
4. Decorate the flowers with beads and rhinestones - they can be scattered like drops of dew or sewed into the middle of the flower.
5. Glue the roses to the foam ball, and fill the empty spaces between them with large beads.

Lovely tradition

At the wedding, each unmarried girl unwittinglythinks about when will this happy day come for her. Probably, therefore, the Western tradition has taken root: the bride throws a bouquet of understudy to her girlfriends, and the one who catches him must soon get married.

But modern wedding floralThe compositions are often not built in the form of a bundle of flowers with stems, but in the form of a plastic frame with a sponge and foot, where the liquid is poured. Such a bouquet will crumble in flight and devour the girls. The composition of soft artificial flowers will not hit anyone and will remain as a pleasant reminder of the wedding.

How to make a bouquet double in a few hours?

Required:

• Ready-made flowers from ribbons. They can be purchased at clothing stores.
• Inexpensive large shiny brooches.
• Thick wire (on thin flowers will look drooped).
• Wooden sticks (round glazing beads).
• Satin ribbon.
• Decorative ribbon with rhinestones.
• The glue gun.

1. First, screw each flower to the wire, collect them in a bouquet.
2. Glue all the stems with an adhesive gun, and around them glue the wooden round beads - this will give the handle a firmness and make it evenly rounded.
3. Wrap the handle of the bouquet with a satin ribbon to completely hide the wire.
4. Attach the brooch.
5. Cut a piece of ribbon with rhinestones, glue it in the form of several stripes.
6. By the same principle, you can make the same bouquets for friends. It looks very nice in the photos.

Wedding trivia

Bridal bouquet is one of the key elementsdecorating a wedding. It corresponds to the whole design, and sometimes even sets the palette and style. Therefore, if you made it from ribbons, then you also need to make a buttonhole for the groom from the ribbons. Of course, it's much easier than a bouquet, you just need to buy a special pin. Druzhkov also should not be deprived, make them boutonniere in tone to the colors of friends. Pillow for rings, flowers in vases on tables and even invitations - everything can be zadekorirovano ribbons. But keep in mind that time for all this creativity will take a lot, and sensibly assess their capabilities. Preparation for the wedding should be in joy, and the bride - fresh and full of energy.