How to clean the laptop so it does not brake: useful tips for beginners

As you know, laptops have one not verya positive feature - they are able to overheat. Sometimes users take a lot of time to understand the reasons for this. And what could they be? Very often overheating happens because of dust. Therefore, in various forums, the actual question is how to clean the laptop. In order not to slow down your computer, it is required to do it without fail. It is worth considering the methods of fighting dust.

Modern devices arequite a powerful technique, the "iron" in which it can heat up during operation. Particularly strong heat is generated during the execution of difficult tasks. The reason for the appearance of the question of how to clean the laptop, so that it does not brake, most often serve as signs, such as shutdown, strong fan noise and overheating. Most likely, every user will agree that it all makes you very nervous. Especially if you are doing something important, and the device is turned off at the most inopportune moment for this. But do not despair, you can still fix it.

In the event that the warranty period is not yetthen you can safely surrender your device to the store where you purchased it. But in the event that the warranty is no longer valid, and you do not want to give the equipment to the laptop repair center, then it's worthwhile to think about an independent search for a solution.

It's not always a question of cleaning laptopsadvanced users. Beginners also suffer from finding solutions to this problem. It is with newbies and it is worth sharing one simple way of cleaning. It is also useful for those who do not know enough about the elements of the computer. Even in the event that you were engaged in disassembling the device before, the question of how to clean the laptop so it does not brake, can still make you nervous. In order to do everything right, you need to follow some recommendations.

1. It is worth to buy a screwdriver, a container with compressed air and anti-static gloves. Clean it on a dry surface.
2. First of all, you will need to remove the backbody part. Turn off your device completely and begin to unscrew the appropriate screws. This should be approached carefully, since the fastening systems can be both under the legs and on the side panel. After making sure that everything is unscrewed, you need to remove the case.
3. It is necessary to clean the fan and radiator from dust. If you decided to look for a solution to the problem of how to clean the laptop so that it does not brake, you should understand one simple thing: everything must be done carefully. Otherwise, after cleaning, you will get other problems. To free the fan and radiator from dust, use compressed air. To rotate the part was not too fast, you must do a short press on the corresponding button of the can. Keep the container upright so that no liquid gets into the device.
4. Remove any additional dustDetails and assemble a laptop. Performing this step, you should check whether all the elements are in perfect order. After cleaning all the details, it is necessary to screw the housing back into place. Everything must be done carefully and carefully. If you start screwing the screw too long, you can puncture the board. This should also be taken into account.

After the laptop is assembled back, youyou need to attach the battery back, connect the charging device and turn on the device. After cleaning, the technique should work quieter and without strong heat. If the problem with heating has not disappeared, it is worth considering the replacement of thermal paste. But in this business already without knowledge of the device can not do. Also it is worthwhile to understand that some devices are too complicated even for simple disassembly. This applies to such models, for example, as Asus. And if you are not sure of your abilities, then you should not try to figure it out yourself. It is better to turn to the center, in which specialists carry out repair of Asus laptops. In Moscow or in other large cities such companies are quite a lot. But if you decide to do everything yourself, then you should wish you good luck.

</ p>