Samsung SCX-4200: the perfect entry level MFP
Specifications allow SamsungSCX-4200 without any problems to organize an entry-level workflow system. This peripheral product is perfect for a compact office. It can also be used in other cases, but with this application, the printing system must be supplemented with other similar devices.
About the device. What manufacturer has included in the delivery?
Laser method of printing underlies SamsungSCX-4200. The owners' feedback highlights the high speed and large print limit. It is these advantages that correspond to the laser method of printing. The main disadvantage in this case is usually the low quality of the output documentation, which is only sufficient for textual or tabular information. The delivery list consists of:
MFP.
Drive.
Cartridge.
Power cable.
All the necessary documentation, which consists of components such as a user manual in abbreviated form, warranty card and a set of various advertising brochures.
Paper. Speed of work
On any carrier with dimensions not exceeding A4 inclusive with a density of 60 to 165 g / m2 can print Samsung SCX-4200. It takes about 20 seconds to warm up this peripheral solution. On the output of the first carrier, he still needs about 12-15 seconds. In the future, this multifunctional device, capable of printing up to 18 pages A4. A similar speed for this peripheral solution is also in the multiple-device mode.
Communications
In just one wayThe connection is equipped with Samsung SCX-4200. Like most similar peripheral universal solutions, this MFP is equipped with a USB port. Its capabilities are more than enough to connect the workflow system. And this interface is duplex and is able to transmit information in any direction. The only significant drawback of this method of connection is that the control functions in the printer or scanner modes are performed by the personal computer to which this peripheral device is connected. It is also sometimes called a print server. In multiplier mode, this MFP is able to work independently. If necessary, you can install an external network card in this device and connect it directly to the computer network.
Cartridge. Possible problems with repair
A cartridge at one full filling station is capable ofoutput up to 3,000 pages. After this, according to the plan of the manufacturer, the owner must purchase a new cartridge. But still there is an opportunity to use the cartridge again. In the first case, an additional microchip is installed, which resets the counter. In the second case, the MFP is flashed, but after that the Samsung SCX-4200 warranty repair. However, from an economic point of view, it is more justified to use the latter method of cartridge reuse. Also, with the right approach, as a rule, there are no problems when updating the software. In total, this MFP can print up to 10,000 pages for 30 days. As a result, the cartridge needs to be refilled 3-4 times during this time interval.
Setup Instructions
The configuration and configuration process is fairly simple in the Samsung SCX-4200. The instruction in this situation consists of the following stages:
Install the multifunction device next to the computer.
Open it and install the cartridge.
We perform all necessary communication operations.
On the PC in the switched-on state, we install the complete set of all necessary software.
At the final stage, we perform a complete check of the workflow node. Immediately print the test sample page, then copy it and finally scan.
After that, such a universal solution is configured and ready for use.
Reviews. Price. Outcomes
Virtually no shortcomings in theprinting and scanning unit. Only one of them is the most significant - the lack of direct network interfaces in the basic configuration. The pluses are high speed, affordable cost of 7500 rubles and a great resource for the withdrawal of documentation. All this allows using a multifunction device economy class Samsung SCX-4200 implement small printing systems and workflow.
</ p>
