Reset BIOS on the laptop to the factory settings: instructions, tips

It is useful for a modern user to find out howmake a BIOS reset on the laptop. In simple words, the BIOS is the basic input and output system. It is a set of programs that are necessary for working with laptop hardware. This system is software.

What is it

Resetting BIOS settings on a laptop is an important stage,which allows you to change individual parameters of the device. The BIOS is a complex of microcircuits. With their help, you can configure individual parts of the system unit. The BIOS is located on the motherboard and is part of the software. The software is responsible for the operation of all the components of the laptop. BIOS prepares the system for inclusion, adjusts the equipment. This software is also called Setup. Manufacturers record it in a chip and install it on a board.

Initially, the BIOS needed to be serviceddisk drives, a monitor, a computer. Today, it performs many more tasks, including searching for the necessary partition and sector on the drive, configuring the system loader. In modern notebook models, manufacturers are increasingly using the new EFI interface instead of the BIOS. His scheme has great potential. For example, subroutines are now embedded between the operating system and the drive.

Functions

Resetting the BIOS on a laptop often becomes a necessity. But before doing it, it is important to understand what functions the software performs.

• BIOS starts up the laptop and tests its operation. After the user turns on the device, firmware is first downloaded. It checks and configures the equipment. If the BIOS finds a problem, it notifies the user.
• Configures the startup parameters. After turning on the laptop BIOS sets up parameters that affect the operation of the entire system.
• Stores information about the settings and other characteristics of the laptop.
• Provides access to various devices.
• Sets the system time.
• Turns on and off the devices.
• Prepares the laptop to boot the operating system.

How to work

In order to make a BIOS reset on a laptop,it is necessary to understand how to work with it. If you want to get into its settings, simultaneously press the F11 and Delete keys on the keyboard. Calling the settings depends on the motherboard. The software is controlled by the ESC, Enter, or Enter buttons. Arrow keys on the keyboard help you to navigate, with their help you can easily select the required parameters. If you want to set the factory settings, press F9. The F10 key will save changes and exit the menu.

Reset

How do I reset the BIOS to factory settings on thelaptop? This is easy enough to implement, especially advanced users. It is recommended to perform it only if the laptop is not working properly. The peculiarity is that many brands that produce laptop computers, it is carried out in different ways. Changing the settings, consider the model and the manufacturer. Reset must be done after the laptop is completely turned off. At this point, all devices, including the power supply, must be disconnected from the laptop. There are several ways to reset the BIOS.

1. Jumper. Find the jumper between the two pins on the board, pull it out, put it between the second and third contact for fifteen seconds, then put it back in place. The method is suitable for users who know the device board.
2. Contacts. Reset BIOS on the laptop can be done by closing several contacts with something metallic, removing the pre-jumper. You can do this only with some models. Turn off the device, take a small screwdriver, close the two contacts for a few seconds, then turn on the laptop.
3. Battery. Find the battery that powers the motherboard. Turn off the laptop and remove the power for fifteen minutes. Then replace the battery and start the device.
4. Button. On many motherboards there is a reset button. The owner only needs to click on it.

What is it for?

Resetting the BIOS password on the laptop is often required if the user has forgotten the old login password. This procedure is also necessary in the following cases:

• The maximum frequency parameters are set.
• If the laptop does not boot, and the reasons for this are unknown.
• Incorrect configuration. Invalid parameters specified.

A reset is required if the notebook is constantly"hangs", does not turn on or off by itself. However, there can be many reasons for this laptop behavior, among them - overheating due to accumulated garbage and the need to reinstall the operating system.

Settings

Configuring the BIOS is not harder than dropping. To start, the user needs to open the settings window. Make it easy with the help of "hot" keys. However, remember, if the laptop is running properly, it boots normally, does not shut down on its own, open the BIOS and change the settings is not recommended. After the main menu is open, use the arrows on the keyboard to change the system time (number, month, year). It is important that it is properly installed. Resetting the BIOS on the Asus laptop, for example, is practically the same as the procedure on the models of other manufacturers, so in any case, the user should not have problems. So, the basic settings:

• The Advanced tab. Most often there is no need to change anything.
• The Security section allows you to configure the security of the device. If the laptop is designed for home use, it does not require changes. Actual for office PCs.
• The Boot section helps you change the boot settingsOS. If a CD-ROM is installed as the boot device, it will check this drive before launching the BIOS. If it does not find anything, the start will happen from the hard drive. Experts advise changing the Boot parameters. The settings depend on the motherboard. Place the cursor against the First Boot Device parameter, press Enter. When a new window appears, find the Hard Disk item, confirm by pressing Enter. Then select the Second Boot Device line and change the settings on the CDROM. Then find the Third Boot Device and set it to Disabled.
• To save the changed parameters, the user must click on the Exit section (exit the window) and save by pressing Enter.

In the BIOS there are other options that canrequire additional settings. For example, the "Information" section contains information about the current state of the laptop. Here, some other adjustments are made. The Main section contains the controls. Before making any changes, check the factory settings. If you are not sure of your abilities, contact a specialist. It is better to take help from outside for reliability.

Advice

In order to do a BIOS reset on a laptopAcer or another modern model, it is recommended to reflash the software. The BIOS has its own firmware, which sometimes needs to be updated. The action helps to eliminate many problems associated with the software, as well as to prevent their occurrence. Re-flashing is a procedure for advanced users. It is implemented through a utility that is usually on the driver disk (supplied with the motherboard).