Technology of nail extensions with gel

The gel is a polymer designedchemically, functioning in much the same way as a natural nail. Gel nail extensions are carried out by means of initially the same chemical compound as acrylic build-up, with a small difference: the gel needs ultraviolet exposure to harden. Acrylic usually freezes in the air.

The technology of nail extensions with gel is sufficientIt's simple, but it's worth exploring. After applying the composition to the nail plate, the nails should be placed under a special ultraviolet lamp. After they have hardened, the nail coating will become very strong. The pour point for this method of build-up depends entirely on the type of lamp used and its power. If your nails are very thin and sensitive, then you can feel the heat or slight burning sensation. It is recommended that every five seconds to remove the hand from under the lamp.

By composition, various gels can be offered. Sometimes such a coating is classified as a "living polymer". It does not suppress or seal the biological system of the nail, but allows it to breathe freely. While the nail plate itself consists of non-living material, moisture does not pass through, and metabolic products, which are associated with the metabolic activity of the skin under the fingernail. The gel has such an important feature as the ability to lie flat on the nail, while it self-leveling. This build-up gives nails a beautiful glossy luster. Is not that what every girl does? The technology of nail extensions with gel makes it possible to make a coating that is resistant to most aggressive liquids. At the same time, nails do not lose their color when painted with colored varnishes, which allows them to be painted just like natural nails - at any time. Gel nails can be removed only mechanically, by cutting the material from the native nail plate, than they differ from acrylic.

Well, if the technology of nail extensions with gel ingeneral outline is clear, then we can say how to shoot them. Removal of the nails after such a build-up is carried out as follows: to begin with, the master cuts the maximum length, and then gently cuts the gel from the living nail plates, clearly controlling the process, that is, seeing the boundary between the gel and the surface. Therefore, if you did such a buildup, you should not try to get rid of them at home, since you can damage the nail plate, which will cause stratification and sensitization, and the recovery period will be very long. And for their removal it is worth to turn to professionals, as they will then process the nails with a special remedy that restores the natural nail.

What you need for nail extensions with gel and the main stages of the process

It will be required, as already mentioned above, the gel,brush, and also ultra-violet lamp. For the beginning the plate is formed, which will serve as the basis of manicure. You can use tips or a form. If the nail is build up on the plate, it is immediately attached to it, and then the gel is applied to it, and the lines help to determine the approximate length of the result. The damage of such an increase is reduced to a minimum, and the result looks very natural. Drying is the next step. It is required to fix the applied material. The nails are placed under the lamp until completely solidified. After this, the shape of the nail is cast, and the last stage is grinding and artistic painting. In this case, a variety of decor elements can be added.

As you can see, the technology of nail extensions with gel is not so complicated, it is important only to be neat at every stage.