Catching on the feeder in the spring. Harvesting the crucian in spring on the feeder. How fish catch on the feeder

The period of early spring is considered one of the mostdifficult to find a good place and catch fish. At this time, ice on the surface of large rivers has already descended, but the water temperature is still quite low. In the bays, ice and snow melt, so that "severe" water enters the riverbeds. During this period, catching fish on the feeder becomes difficult, since vertebral aquatic animals are still inactive.

It is quite easy to determine this period - snowalready no, but the awakening of nature has not yet begun. The rivers at this time are dull-gray in appearance, and the banks with bare bushes and trees. Fishermen, who are already sitting by the spring water, do not add optimism. Is fishing hopeless at this time? No, successful outcome is possible. But for this we must know certain terms, which will be discussed later. Taking advantage of our advice, you will not go home fishing with empty hands. All the further said is optimal for any large river.

Choosing a place for fishing

Suppose, in the river floodplain, on one bank, moreshallow and canopy, the vegetation in the water is 12-15 meters from the edge. The depth at this distance is not large. On the other shore, more precipitous, the water vegetation begins already at 3-5 meters from the coastline, but in this place the depth is much larger. On which shore catching the feeder will be more successful?

It should be borne in mind that when the solaractivity, water in the river is stratified according to the temperature regime. Its warmer mass lies in the bays in shallow water. Accordingly, the first above described shore is more preferable for fishing in this case. It is shallower, warms up better. Vegetation is located far from the shoreline and at a shallow depth, which creates a sense of security for the fish. Given the transparency of the water, it is better to choose this beach for fishing.

Additional benefits

If, however, the described selection of a fishing siteAdd the presence in any places of sewage of warm temperature, most likely, this will be the best option, which is worth paying attention to. Fishing on the feeder in the spring here will be the most successful. Of course, this is just a guide to action, so to speak, general arguments. Naturally, almost every experienced angler knows those places in his region where it is optimal to start the season. Therefore, it is not worth it to be wise and it is necessary to start to harvest them first of all.

Fishing on the feeder

The feeder is considered to be the tackle that is notwill allow to remain without a catch during the early spring. Therefore, you need to know what should be the minimum necessary equipment in this case. For the feeder, first of all, rods that have certain qualities are important.

Feed tip selection

In the assembly of tackle there is nothing complicated. But at the same time it is necessary to take into account the choice of the tip of the feeder, which is its "heart". In this case, everything is simple - when there is no wind, you should choose the most flexible part. Often there are three of them in the tackle, but if necessary, it can be purchased additionally. Each of them indicates the degree of sensitivity. For its independent determination, it is sufficient to clamp the base of the tip of the feeder with one hand, and the second one to try to bend it. Thus, one can understand whether it is rigid or flexible.

Feeder selection

The choice of location is very important in this caseFor fishing. If the flow is strong, catch on the feeder should be made with a rectangular, heavy feeder. These two requirements in total will not allow the flow of water to demolish it. But it is also important not to go over the weight of the feeder, otherwise the sensitivity of the feeder will be lost.

Another important point. For incomprehensible reasons, anglers often prefer metal feeders, ignoring plastic ones. But still it is desirable that the latter also exist in the kit. The thing is that feeders made of plastic, much faster come up. This is an advantage when there are snags on the bottom, or it is overgrown with algae. In this case, the plastic feeder quickly appears on the surface, avoiding collision with the potential causes of breakage.

Choice of line

Since catching on the feeder in the spring is carried out onshallow water near the shore, then the optimal option will be a mono-forest with a load of a gap of 3 kilograms. Thicker to put is not recommended. Such a fishing line it is quite possible to produce long casts and fish large sizes of fish, using an 80-gram feeder. In some cases, fishing with a cord is the best option. The braids are strong and thin at the same time, and most importantly, for the described type of fishing, they are supersensitive.

Choice of hooks

When catching on the feeder in the spring, hookspick up is quite difficult. They often turn out to be too small, too big. First of all, the hook must be of high quality. For this reason it is important to pay attention to its shape, wire thickness, trademark. But most often these parameters depend on the personal preferences of each fisherman.

If you select a small hook for the feederwith a thin line for the leash, then bites should be very much. Also often, fishermen choose these medium-width gear components with a long forearm. In the case when catching roach on the feeder, as well as yaz and carp, it is preferable to select hooks that are made of thick wire.

The main parameter when choosing this part of the tackle is sharpness.

Choice of leash

When fishing for the feeder is carried out, the leashes mustbe a lot. They come in different lengths, diameters, are made from different materials and come in different models. Sometimes more than 50 pieces of this component of tackle are present in the stock of the fisher.

The lead for the feeder is a replacement part. This is a piece of fishing line, which has a certain diameter and length. To one end of it is attached a hook, to the second is attached a recess.

Catching on the feeder in early spring suggestsThe use of leashes made from a suitable fishing line or special material. In this case, you must take into account the rigidity, diameter, color, transparency, abrasive stability, tensile load. Leashes when catching the feeder are consumables. For one fishing they can lose more than a dozen. This is due to the presence of steep bobs, shells, snags, algae in the water.

Bait for the feeder

First of all, a smalla ball of foam that has a white color. After that, 2-3 squeezes are inserted in the rings, that is, their bodies are pierced twice - at the tail and below the head. When catching by a feeder on a river, on a white background of a foam ball, the scarlet-colored bloodsail becomes such a bright target for fish that neither the chub or roach refuses it. In addition, the bait, which is on an invisible leash that plays at a certain depth, becomes attractive to all vertebrates living in the water. They see the bait in this case at rather large distances.

Feeding for the feeder

Catching on the feeder is performed usingvarious baits. Three to four parts of the total volume of the mixture can be breadcrumbs. They are part of almost all baits. Ground biscuits or sponge cakes have the best flavor and taste for fish. Part of the bait can be ground grain - wheat, corn and others. They have the best taste and fish-retaining properties on the spot in steamed or welded form. An additional factor for increasing the catch is the addition of fried and ground seeds of sunflower, its cake, into the bait. Peanuts are sometimes present in it. It must also be previously fried and crushed. It is very good as a bait for a large fish. Baking powder is used for feeder bait. As components stopping at the point of the fish, grains are used in steamed form or canned - millet, pearl barley, corn.

Harvesting by crucifer

When catching crucian carp in spring on the feeder,it is necessary to take into account that one should not make long casting into pools with great depth. Optimum for such fishing is the thickness of water no more than 1-1,5 meters. This depth is always near the coastline. This makes it possible to search more effectively not for reams, pits and crooks, but for underwater vegetation, for inundating driftwood and shrubs, taking into account the specific conditions of spring fishing. Harvesting of crucian in spring on the feeder should be carried out taking into account the presence of currents. After all, the slightest of them brings a cold stream at this time of the year, which frightens off this kind of fish. Caraci usually move in flocks along the shore. Often bites follow one after another. Therefore, fishermen need to act fairly quickly, as flocks of crabs not only come suddenly, but also immediately leave the place of catching.

Catching bream with a feeder

If a bream is caught on the feeder in spring, thenthe feeder makes it possible to cast the required distances and bookmark the portions of bait alongside the hook with bait. This is in itself a fish-attracting factor. Selecting a bird feeder for catching bream, it is necessary to pay attention to the fact that after lowering to the bottom lay motionless, not displaced from the flow of water. Otherwise, her hesitations will only be frightened off by cautious bream.

It is not necessary to build a fishing tactic only on that,that the fish will come to the bait cooked for her. It is necessary to start from the characteristics of the reservoir, its bottom, knowledge of places for more successful feeding of schools of bream. When such knowledge is insufficient, it is recommended at least to try to find confirmation that in one or another place of the reservoir the bream is actually fed. Visually, it can be defined as follows - clouds of turbidity rise from the bottom, air bubbles come up, small waves develop on the surface of the water.