Oil Change in the Car Box

Each new car has an instruction. This instruction can not be neglected. It is advisable to read it carefully. In it you can find a lot of interesting things. For example, there you can read about how the oil is changed in the automatic box. To do this is not so difficult as it might seem at first. True, if you have never encountered similar work, you can turn to the help of specialists in SRT.

If for some reason you have not savedinstructions from the car, information on how to change the oil in the automatic box, you can find in all sorts of information guides on cars. It is also useful to look at the information on the Internet, to communicate with the owners of cars of the same brand as you, on the forums.

So, what you need to know in order to replaceoil in the box was easy and simple? The oil, which is in the box, is completely unaffected by the fuel. Also, it is not affected by soot or condensation. But at the same time, the oil gets dirty with time. This is due to the fact that the mechanical parts inside the box rub against each other and form small particles that settle in the oil.

Every time a car is inthe oil in the box is very hot. And this is also one of the reasons to think about the need to change the oil in the box. The owner of the car should remember that the box should not heat up to 90 degrees of heat. If the temperature of the oil is higher, it begins to "wear out". If the temperature reaches two hundred degrees, the oil becomes completely unsuitable for further use.

And here's another reason for the oil changein the gearbox was made in a timely manner. Any oil for the automatic box contains in its composition special elements that prevent the appearance of corrosion and rust on the internal mechanisms of the car. But over time, these useful properties of the oil is lost.

Replacement of oil in the gearbox of VAZ 2109 is made in the standard way. For this:

• The car rises with a special lift.
• The pallet is removed from the car.
• Carefully merges the old oil.
• The old filter is replaced with a new filter.
• The pallet returns to its place.
• A new high-quality oil is poured through a special opening-the "neck".

The gearbox will need to be washed ifThe car was used for a long time without changing the oil. For this purpose, special additives are used. Flushing the gearbox in such cases is a necessary procedure before changing the oil.

Flushing is necessary for:

• Getting rid of carbon.
• Getting rid of soot.
• Getting rid of other contaminants.
• Washing of oil channels.

For washing the gearbox, you can use special cleaning fluids, which are sold at the service station or in auto parts stores.

In order to avoid problems with the car, replace the oil in the box regularly. Even in the case when the car is little used.

</ p>