How to design a caterpillar all-terrain vehicle with your own hands?

A technique that can go through both the snow and theswamp, and mud, is necessary for people who live in fairly difficult conditions. However, not everyone knows that it is not at all difficult to make a caterpillar all-terrain vehicle with your own hands. Thus it is possible to use improvised materials. In addition, such an aggregate can not only travel overland, but also float along the water.

Such devices are quite goodcharacteristics: an acceptable fuel consumption (about 45 liters per 100 km), an average speed of about 45 km / h. Naturally, such a technique has a fairly large weight (up to half a ton), although everything depends on the materials used. To build an all-terrain caterpillar with your own hands, you need to collect all the necessary parts for this: engine, control system, cabin, chassis. The main box can perform not only a protective function. If the cockpit has a sharp nose, then on the vehicle it will be possible to move in the tall grass, as the bumper will push the thickets. At the rear, the unit can be equipped with an air intake with an electric fan. It is desirable to make the body sealed so that water can not penetrate it.

If you want to design an all-terrain vehiclecaterpillar with your own hands, then you first need to make a platform on which the cabin will be installed. It will house the engine, caterpillars, control system, fuel tank, exhaust pipe and other mechanisms necessary for the normal operation of the device.

With regard to the management of this transportmeans, it can be the same as that of a tractor-lever. To stop the unit, you can install conventional car brakes, and from the domestic machine. Next, the all-terrain caterpillar with our own hands do this: in the middle of the platform, we need to install a lever for the mechanical tension of the tracks.

Further it is necessary to make so that the given transportcould ride. To do this, buy or make caterpillars. For example, trucks can be made of cast metal independently, and in order for them to move, it is possible to purchase a conveyor belt. Naturally, the caterpillars should be worn on the guide sprocket and supporting rollers.

In order to design an all-terrain vehiclecaterpillar with their own hands, you also need to buy wheels from the stroller, although you can take already used items. In addition, this part of the machine must be protected from dirt. The driving wheel should be equipped with hooks on which rubber covers are put on.

Cross-country vehicles on caterpillarsit is not difficult, but that they can be used, it is necessary to build a chassis. The gearbox of the rear axle must be attached to the engine with the gearbox. For semi axles, it is desirable to install bearings. From the reducer there are shafts to the onboard disc brakes.

In principle, these are all the main features of designing such a vehicle. At the same time, you can be sure that you will get stuck in the snow and not drown in the water.

</ p>