Protective film on the car. Car sticking with protective film

During the entire operation of the car, scratches andchips on the details of the body become commonplace. Most of all, wings, a hood and a bumper, related to the front of the vehicle, suffer here. It is in order to protect them from damage first and install a protective film on the car. The anti-glare transparent coating can be cast vinyl (PVC) or polyurethane, its thickness can vary from 100 to 200 microns. Each of these materials has both pluses and minuses.

Features of vinyl material

The service life of PVC film is about 8 years. Its peculiarity lies in the fact that it can glue details of any complexity even completely. Superbly lies such a transparent protective film on the thresholds of the car. Its thickness is 100 microns. Despite the small thickness, it perfectly stretches and perfectly protects the car body from reagents and mechanical damages. It is applicable mainly to the urban environment and with long-term both partial and complex pasting.

Features of polyurethane film

The polyurethane material of such a plan is stronger andthicker than vinyl, but also at a price superior to the latter. Its service life is 4-5, sometimes 7 years. Its thickness is 100-250 microns. Such a protective film on the car is valued due to its good elastic qualities and thickness, which allows the best way to protect the body of the "iron horse" from damage. Of course, due to the special composition and high density, the film can not operate on complex geometric surfaces. It also does not cover the entire car.

Often used such a protective planfilm on the headlights of the car, being one of its most vulnerable places. Before applying to the work surface, by the specially prepared pattern contour, the plotter cuts out the right amount of material, and then it is applied to the parts and parts of the unit. Most often, the film is used with the existing intensive mechanical loads.

Protective film on the car protects the body from chips

Anti-gravel film material enableskeep the paint coating of the car in proper form, so that in the future there will be no need for its restoration, which will save considerable money. In addition, it is quickly and uncomplicated dismantled without any traces.

Especially popular car cover serviceprotective film from the owners of new vehicles, who are hungry for as long as possible to maintain the ideal factory painting. Installation of anti-gravel material is carried out in very short time, sometimes only a few hours. Professionals qualitatively process their wings, bumper, hood, rack and even mirrors.

Why do I need a protective film on my car?

Thanks to modern application techniquesthe problem of 100% coverage of the car became feasible. To this technology resorted, if you need to pay attention to the often vulnerable locations of the unit. More and more often a polyurethane or vinyl protective film on the car is used to prevent chips on the body of the transport unit. The properties of the materials ideally correspond to the fact that they are used for installation on devices that are operated even in special weather conditions.

The hood suffers from chipping most often. Its front part is damaged from the rapidly falling into it during the ride of small stones that fly out from under the wheels of oncoming cars. Therefore, experts recommend first of all to take care of the protection of the paintwork of this part. It is best to paste it completely, but if there is a desire to save, then it will be sufficient to process only the front part, somewhere 50-60 cm.

general information

The thickness of the film material for the body is100-150 microns, which corresponds to 0.1 mm. After a complex of works on lamination it at a distance of 1-2 meters is completely invisible. A vehicle with protection is no different from the traditional one.

Field of application of the film

All types of anti-gravel films have a specialspecial adhesive composition. It is designed to qualitatively cover parts that have a glossy surface, slightly roughened or poorly developed matte. It is important to know that the adhesive composition of the material is rather weak, and sometimes its thickness may not be enough to penetrate into the rough layers of the matte surface. That is why the adhesion characteristics are minimal, if compared with a glossy material. The best way to cover the car with a protective film of any kind is to entrust professionals.

Life time

Protective transparent film material from the momentinstallation will serve an average of 5-7 years. It is desirable to install it immediately after purchasing a new transport unit or second-hand, but with a paint coating that is in good condition. Delay with this decision is not necessary. If the installation of a material such as a protective film on the car, is postponed, that is, the risk of obtaining a lot of microcracks on the body of the machine.

Benefits of using a protective film

The use of film material is possible on anytransport parts - threshold, headlight, bonnet, wheel arches, wings and other elements. More difficult is the pasting of the car with a protective film on the bumper section due to the presence of many hemispherical parts and bends. But this difficulty is surmountable, the material is well stretched and makes it possible to process even the most complex parts of the unit without seams.

Currently, many motoristsinstall special protective deflectors on the hood from gravel damages, called "fly swatter" among the people. But if the film material is installed, then there is no need for additional protection. Over time, a transparent vinyl or polyurethane coating is easily removed and leaves no traces. Also among its advantages are resistance to chemical influences, protection against ultraviolet radiation and the presence of water repellent properties.