How to connect a washing machine hose

When buying a washing machine in a standardcomplete with the equipment itself must go the hose for the washing machine. More precisely, there should be even two hoses here, one intended for connecting the machine to the sewage system, the other to the water supply. The bottom line is that in order to understand all this, there is no need to call a master. To connect hoses for washing machines it is possible and independently. Moreover, it is worth considering that this will save a certain amount of money. Also, the manufacturers of this equipment do not deprive you of a guarantee if you are self-installing.

So, first of all we will install a hose for washingmachine, which is intended to connect it to the sewer. Initially, it is worth noting that before buying a machine you need to choose a place for it. It is now accepted that she is standing in the kitchen or in the bathroom. In any scenario, it is desirable to have a separate sewer hole for it. If the last repair of the apartment / house was carried out within the last ten years - such a hole will be necessary, because now the plumbers provide this. In the event that it is not there, there are two ways out of the situation. The first is to equip a place for styralki. This can be done simply by calling plumbers. Such an operation will have the most insignificant effect on your wallet. Of course, if you want, you can equip yourself with equipment yourself - it's still not easy. But now it's not about that.

The second way out of this situation is to leave everythingas is, attaching the drain hose to the toilet bowl or to the sink. There are no problems with this and should not be. The only thing that it will need to be extracted every time from the same shell and again lowered there, because otherwise it will interfere.

Also it is worth noting that it is not uncommon for those cases,when this hose for connecting the washing machine is slightly short (or maybe not even slightly). To panic it is not necessary - it is enough simply to buy it in the store. And the purchased hose can be used not instead of the standard, but with it, as its continuation.

Well, the last, but very important point. The hose for the washing machine should go out to it from the sewer at an angle of 45 degrees. Otherwise, it is very possible that all the fragrances with which the sewer pipes are saturated fall into the washing machine.

Now the hose for the washing machine,its purpose is to connect it to water supply. In this case, the stylalka is connected by means of a special tee (fitting). One output of such a tee leads to the tap of a sink, the second - to the water supply system, and the third - directly to the washing machine. And this last output must have a diameter of the connection ¾. But before you attach the hose to it, you need to first put a tap there, with which you can turn off the water supply to the machine if necessary. Also one more important feature, in this case, all the connections (in addition to connecting the hose with the washing machine) are carried out with the help of flax or a special plumbing thread.

</ p>