"Izostud" (membrane): types, characteristics, application

What is an insulating membrane, a person far awayfrom construction, is unlikely to guess, but those who work in this area are well aware that without the use of this material, it is practically impossible to provide quality waterproofing protection to structures of any kind in many areas. But this is only when the material meets all the technical requirements imposed on it. "Izudud" - a membrane, which is known in the construction world as a reliable protection. What is this material and why is it needed?

Material Features

Rarely anyone from individual developersuses waterproofing film during work, considering it an unnecessary material, because the enclosing structures for water are impenetrable. Unfortunately, this is a very common misconception: moisture under the influence of capillary suction, gravity and wind pressure can penetrate through the smallest holes, almost invisible to the naked eye.

Prevent moisture from enteringany design will help waterproofing "Izudud". The membrane is available for use in different areas, so it has a different thickness. So, for example, to protect flower beds or foundations of temporary structures, a material with a thickness of 0.4 is suitable.

Advantages and characteristics

What will be the application of this material? The drainage membrane will increase the service life of the structure, reduce the cost and time of waterproofing. You can stack the material in any weather without special preparation. And you can place the film horizontally, and vertically - in any position, on raw or uneven surfaces.

The following properties can be considered advantages:

1. Easy and convenient installation. Apply mechanisms, a special tool, you do not need to have professional skills.
2. Chemical and biological resistance.
3. Resistant to root germination.
4. Guarantee from 20 years, but serves as a drainage membrane much larger - almost as much as the construction will stand.

About the manufacturer

"Izostud" - a membrane produced by the company"Subject". The company is known as a manufacturer of quality waterproofing materials. For 11 years of work, the company's employees have not only accumulated invaluable experience, but also introduced new technologies in the production, expanded the range of products in such a way as to improve the characteristics of materials required for various types of work.

In addition, the production uses the mostmodern Italian equipment. It is thanks to this that the company manufactures canvases with a width of 4.8 m. These are the largest indicators to date. The type in which the waterproofing material is produced is rolled. This is necessary for convenience of storage, transportation and subsequent installation.

Product range

1. "The art studio". Membrane profiled type. Over the entire area of ​​the material, the projections are evenly spaced. They have the form of a truncated cone. The height of each element is 7.5 mm. Designed for installation both indoors and outdoors. The width of the roll is 2 m, weight is 500 g / m².
2. "The artillery ABM." Profiled high density polyethylene material. Available in width 3 m, weight - 0,6 kg / m². The film has a technological allowance for full sealing of joints. To fix them, you need to apply self-adhesive tape "Eloten".
3. "ISudstud MC". For the production of a profiled membrane, high-density polyethylene is used. Distinctive features of the film of this type: weight - 400 g / m², width - 2.0 (1.5) m.
4. "The GEO Drawboy". This is a film on which one of the surfaces of which, during manufacture, a geotextile layer was applied. Geotextile is a non-woven polypropylene that can not be silted. Due to the presence of gutter channels between the geotextile and the membrane, there is a withdrawal of excess moisture from the ground, and this is a pledge that the equipped drainage systems will function fully and provide excellent hydroprotection.

Areas of use

The material is intended for the following tasks:

1. Waterproofing protection. After installation, the glued surfaces do not allow moisture to escape, providing insulation of the walls below the soil level and the dryness of the basement.
2. Arrangement of drainage. The membrane serves as a filter for accumulating rainwater in the ground, while retaining small particles of soil.
3. Landscaping. The material is used to stabilize the soil in the manufacture of tracks and areas near the house. Due to this there are no failures of asphalt, tiles, waterlogging of the soil, the grass does not grow on the surface.
4. Replacement of concrete preparation. The use of the membrane is advantageous from an economic point of view for those structures where the foundation is not necessary - temporary hozpostroek.
5. Repair of cellars. To eliminate the sources of moisture formed due to poor quality external waterproofing.
6. Arrangement of exploited roofs.

</ p>