Direct or direct electricheating private house - the most popular in Europe. At the same time, the heating of the house takes place without intermediaries, that is, the transfer of electrical energy into thermal energy is carried out directly, while the efficiency is almost 100%. This type of heating in Russia has been developing more actively lately. That is why it is worth considering it in more detail.
The operation and management of the system are verycomfortable. In each room, you can easily set the desired temperature level. In this case, it is not necessary to load coal, wood or pellets into the furnace. After that, you do not need to remove the soot, and also produce a lot of other actions. It is enough to set a suitable regimen on the thermoregulator. Almost all the energy spent goes directly to the heating. The dimensions of the heating devices are quite small, or they are hidden, and they do not require any special care. Electric heating of a private house is completely harmless and environmentally friendly. The system is absolutely noiseless.
The main disadvantage in this case are costson electric energy. They can be minimized, reducing heat loss, and also due to the precise temperature adjustment in each room of the house. Such a heating management system allows you to save up to 40% of electricity, while not losing thermal comfort. When heating with a warm floor, the heat distribution is uniform, so you can lower the temperature in the room by 2 degrees, without changing the feeling of comfort for a person.
Electric heating of a private house, reviews aboutwhich are usually positive, has certain characteristics. It is important to plan the installation of such a system even during the construction of the building, otherwise it will require the repair of the entire building. It is necessary to take into account the power and condition of all wiring in the house. For large houses, it may be necessary to connect to three-phase electricity. It is necessary to know how much power is allocated to the house, and what part of it can be used for heating. In the case of using such a system, it is worthwhile to understand that the floor covering is the radiator here, therefore there will be no problems with the tile, and there are difficulties with the laminate, linoleum or carpet, since they can not be heated above 27 degrees, which is not enough for heating. It is necessary to supplement the system with wall convectors.
</ p>