Bath furnaces of the company "Feringer" on the marketare presented in large numbers. A distinctive feature of the models can be called qualitative heaters. They are released both open and closed type. By the diameter of the heater can vary greatly. The allowable volume of the steam room depends on this.
According to the design of the furnace of the presented company arevery attractive. Decorative inserts on them look great. For convenient use of the stoves, there is a convenient ash pan. If necessary, the grate can always be cleaned. Also in furnaces of the presented company there is a system of protection from soot. It is an average model "Feringer" for a bath for 15 square meters. meters around 32 thousand rubles.
Sauna stoves with open stoves in the lasttime is very popular. In this case, the valves are made of refractory steel. The afterburners are located in the lower part of the kilns. Convectors are installed in models with grate only. They did not directly blow them. The diameter of the nozzle may vary. Chimneys for furnaces are used on an average width of 130 mm. A qualitative oven with an open stove in the area of 24 thousand rubles will go around.
Furnaces with closed heaters are great forlarge steam rooms. A distinctive feature of them is a volumetric furnace. Also, models use special slats. In some furnaces they are installed with a latch. For a normal air circulation and a gas outlet, a damper is used. Water dispensers are available in different volumes. Directly the ash chambers are located at the bottom of the devices.
Lining for models by the manufacturer providedheat-resistant type. In operation, ovens with closed heaters are very simple. Screens are used in different sizes and look great. If necessary, the damper can always be cleaned by yourself. It will cost in our time a high-quality oven for the bath "Feringer" in the vicinity of 32 thousand rubles.
If you believe the opinion of the owners, the furnace "FehringerClassic "is ideally suited for steam rooms at 15 square meters, in this case the heater is provided in a closed type.The ash chamber at the model is located at the bottom of the device.There is a thin insulating lining above it.The stones can be loaded up to 55 kg in this furnace.The height is equal to 800 mm, and the model weighs exactly 120 kg, the flue gas system is in this case, so combustion products never enter the steam room.
The grate near the stove is made ofrefractory steel. The remote tunnel of the model is located in the lower part of the structure. According to many buyers, the ash pan is foreseen. Thus, it is often not necessary to clean it. The lid of the combustion chamber opens freely. The convector has to be monitored periodically. However, the nozzle is rarely contaminated, so it should only be cleaned once a month. To buy the presented oven for the bath "Feringer" in the store can be priced from 25 thousand rubles.
Data of the furnace for the bath "Feringer" reviews fromBuyers' reviews tend to get good. The heater has an open type. For large steam rooms, the presented modification is not suitable unambiguously. It should also be noted that the ash pan of the model is of low capacity. Thus, the device weighs a little. However, the ash pan is often cleaned. The lid at the fuel chamber is located at the bottom of the structure.
According to many buyers, it opensit's always easy, and it's very easy to close. If necessary, the water dispenser can always be checked. The damper in the presented model is located near the ashtray. The system of gas outlets in the model is available. This furnace also boasts a high-quality refractory lining. The specified model in the store does not exceed 30 thousand rubles.
Most buyers prefer thisfurnace because of the quality afterburner chamber. In this case, the high temperature is reached very quickly. Thermostable lining of the model is available. Directly the ash pan is under the furnace. The puddle is in turn located in the upper part of the structure. The nozzle of the model does not have a large diameter.
If you believe the reviews of buyers, then decorativethe frame looks great. The furnace door is quite comfortable, and opens without problems. If necessary, the ash pan can be pulled out easily. The lower frame near the stove is solid. The total weight of the model reaches 110 kg. In this case, the height of the combustion chamber is 33 cm. The protective damper at the model is provided by the manufacturer. The chimney in the construction is available in a diameter of 155 mm. The flue system is made of heat-resistant pipes. Buy the model user is able to only 25 thousand rubles.
The indicated bath oven "Feringer" is suitable forsteam rooms at 13 square meters. meters. The ash pan of the model is of small size. However, in maintenance it is quite simple. If you believe the opinion of buyers, then problems with the convector are rare. There is a water tank in the upper part of the chamber. Under the flap, the lining is provided. The direct tunnel is equipped with a special protective cover. Also, the presented furnace is distinguished by a quality ashtray. The nozzle is not of large diameter. The decorative insert at the stove will look great in any bath. Buy this model, "Feringer" can be for 28 thousand rubles.
This furnace receives feedback from customers onlygood. This model is suitable for steam rooms at 14 square meters. meters. The combustion chamber in the structure is located above the ash pan. Directly the grate is located near the convector. Insulating lining under it by the manufacturer is provided. The model has a standard blower. Next to the ash chamber is a small door, which is very easy to open and snug against the frame.
According to many owners, the latch at the stovestrong. All gases are removed through the system and do not enter the bath. The decorative frame of the model is. The shear in this case is of a rotary type. Stones in the specified model a maximum can be put 50 kg. Buy in the store oven for the bath "Feringer" user can for 30 thousand rubles.
Many owners of this stove in the first placeis valued for its compactness. She does not take much room in the steam room. The combustion chamber itself is available at a height of 35 cm. There is a safety shutter in the model. The ash chamber is located above the frame. The ash pit in the presented model is located on an insulating lining. Convector in the oven is installed standard. The water dispenser is located immediately above the afterburner.
If you believe the opinion of buyers, the protection systemthe model uses qualitative. In this case, an external tunnel for air circulation is available. Installation of the oven in the bath is quite simple. The damper is of a sliding type. A thermal damper at the convector is available. Also it should be noted that a maximum of 55 kg can be placed. Buy this oven for the bath "Feringer" in the store user can for 32 thousand rubles.
If we talk about the parameters of the furnace, "Fehringer"It is important to note that its mass is 110 kg, the grate is 40 cm wide, and the chimney is provided by the manufacturer for 155 mm." The fuel chamber is in this case with a grate. Insulating lining under it is available.
The ash basin has a standard,Problems with it are rare. However, there are still drawbacks in the model. First of all, the owners note a small afterburner. There is no damper in it. The frame is fixed, but its legs are not too stable. If to speak about advantages, then the qualitative gas exhaust system deserves attention. In this case, the casing over the convector is provided by the manufacturer.
The remote tunnel of the model is installed largediameter. A dispenser for water is provided by the manufacturer. For secondary air supply there is a separate channel. The glass in the present device is of a heat-resistant type. Stones can be loaded in a capacity of 60 kg. Suitable model for baths of 15 square meters. meters. It is also important to note that the gate is installed with a gate valve. Find the furnace company "Feringer" "Baby" (steam modification) in the store can be priced from 24 thousand rubles.
</ p>