How to make a stand for the phone? Convenient gadget from improvised materials

In our progressive time it is difficult to meeta person who would not have a mobile phone. Even sending a child to the first class, parents provide him with the necessary means of communication. We use modern mobile devices not only for communication, but also for gaming applications, typing, reading, and watching videos and much more. Often, the owner who wants to have a phone is always at hand, I want to arrange it in a convenient way. The stores offer a variety of expensive holders, but from this article you will learn how to make a stand for your phone with your own hands.

Stationery binders

Surely, those who study or work in the office,There are several clerical clips on the desktop, called binders. Next, consider how to make a stand for the phone from these devices. To create a strong holder, you can use 1, 2, 3 and even more benders. Some craftsmen collect bulk designs from a variety of different sized clips. But these supports look cumbersome, and for temporary use they are inconvenient. It is enough to fix two binders between each other and not to forget one metal end of the holder to bend slightly towards the phone located on it. Even one part with a folded eyelet will be enough to support the mobile device.

From the same binders you can build anotherconstruction, placing the clamps opposite each other so that the ears are looked at the sides. At these ends and the phone is inserted, as in the grooves. To keep the clips steady, hold the small cardboard on both sides.

We use pencils

In the event that there are no binders at hand,the question arises: how to make a stand for the phone out of pencils. Before building this structure, prepare 4 elastic bands and 6 pencils. In fact, you need to collect a volumetric geometric figure - a tetrahedron. The principle is that it is necessary to fasten two pencils with an elastic band, and the third to push between the turns. It is advised to use pencils with an elastic band on the end to prevent slipping on the table and a stronger grip on the phone.

Models from bottles

In the household we use a lotcleaning and detergents. Most of them are contained in plastic containers. It can be used as a mobile device holder. And how to make a bottle stand for the phone, we will consider further.

The type of device will depend on the shapecontainer. It can be a container of shampoo, shower gel, cleanser and another. Take the bottle longer than the phone once in two. Cut the neck and part of the container from one side to about the middle. All dimensions are relative - measure at your own discretion. In the opposite area of ​​the bottle, cut out a hole corresponding to the parameters of the charger. You should get a detail resembling a handbag or a pocket with a handle. Put the phone in the stand, and connect the adapter to the network through the hole. Your mobile communication tool will not roll on the floor, and the risk of crushing it will disappear. You learned one more way - how to make a stand for the phone. If desired, this holder can be painted, pasted with beautiful paper or cloth.

Stationery Staples

The simplest and most affordable version of the stand isusual metal clip. It must be unrolled in a straight line and folded as shown in the diagram. The resulting product is quite strong and stable. This design perfectly holds the mobile phone, completely without interfering with viewing the video.

Cardboard and plastic cards

How to make a stand for a phone made of cardboard? You will need a cardboard sheet, from which you need to cut a strip size 10 x 20 cm. Then you need to fold it in half along the short cuts. Next, draw a shape, as shown in the photo below. The fold line must remain intact. Opening the part, you will see that you have a convenient and stable stand for your phone.

If you have an unnecessary card (anycard discounts), from it, too, will get an excellent stand on the phone. It is very simple to make such an adaptation at home. Leave the edge of the map 1 cm and bend the part along the short side. The rest of the card is bent in half in the opposite direction. You will get a zigzag shape. Place the phone on the protrusion. The stand is ready.

Unusual coasters from simple things

Smokily people as the holder of the phonebegan to use ordinary glasses. They need only turn upwards, which, in turn, must be crossed. The mobile device is located between the frame of the frame and the temples that hold the phone.

How to make a phone stand from a childdesigner? In this case, everything depends on your creativity and imagination. To create such a model, it is necessary to use a platform and several bricks of various shapes. The stand of the parts can hold the phone in both a vertical and a horizontal position. The tilt of the screen can be adjusted by adding or removing additional bricks.

Another interesting detail that will helpkeep the phone in an upright position - an old cassette. It must be opened and flipped back, thereby removing the box. In the hole, which used to be a pocket for audio cassettes, you can put your communication device. The convenience of the stand is that it is fairly solid and transparent, does not interfere with the use of the phone. In addition, it can be easily washed.

As you can see, from the simplest items that can be found in every house, you can make such a useful thing as a phone stand.