Quality water supply is an Abyssinian well

If you need to organize in a short timequality water supply in its suburban area, the most appropriate and optimal option will be the Abyssinian well. However, it is worth remembering that the installation of this structure is possible provided that the groundwater is not too deep.

The Abyssinian well is very lighta combined construction, which is simple in construction and in use. This structure refers to the type of drilled wells, in which the rise of groundwater is possible from a shallow depth (not more than ten meters).

A modern Abyssinian well has thisdesign: a set of galvanized steel pipes, whose diameter is 25-70 millimeters, and length - about 1.5 meters, are attached to each other with the help of a coupling. The strength when submerged in a well or slaughtered by galvanized pipes provides the thickness of the walls of steel pipes, it must be at least 5 millimeters.

At the very bottom of this design,special threaded tip. This detail is a quadrangular point, approximately 25 to 30 centimeters in length. It is necessary to take into account the fact that its diameter should be greater than the filter diameter by about 5-10 millimeters. This element of construction with a massive clutch is connected to a special filter, which is a pipe having long holes from 0.7 to 1 meter.

These holes are made in strict staggered order. They should begin approximately 20 centimeters from the coupler and the sharp tip. The size of these holes should be from 3 to 8 millimeters. After installation, this part of the tube is wound with a stainless steel wire, the cross section of which is from two to three millimeters, and the distance between its turns is from fifteen to twenty millimeters. And only on top of the wire you can attach a filter grid. This filter element is attached by means of cross-linking or soldering.

A ball valve is mounted in the coupling itselfspecial filter. The lifting of this valve is limited by a stopper. For the lifting of groundwater, a piston pump is used, which looks like a column equipped with levers. The productivity of this well depends directly on the thickness of the suction pipes.

Abyssinian well - choosing the right place

Before building this useful structure,it is necessary to find the most suitable place. You can perfectly build an Abyssinian well with your own hands, the main thing to remember is that the location of this structure should be at the maximum distance from sedimentation tanks or cesspools. Otherwise, contaminated wastewater will be mixed with clean groundwater.

Bacteriological and chemical examination of groundwater must also be carried out without fail.

The Abyssinian well itself is difficult to build on its own, but independent construction will help you save money on the services of the work team.