Does the fungus settle on the walls of your house?mold? If the answer is yes, then it's time to take action. Most inhabitants do not know from rumors what mold is on the walls. How to deal with this? Consider the signs of the appearance of mold - the source of the fungus.
Mold in appearance. How does she look
Often a brownish coating on the walls of the bathroom orin the kitchen you can not confuse with anything else. Yes, it is a harbinger of mold. And the smell is also specific. In many outlets, sellers will offer you special air dryers. Thus, they are sure they can answer you, how to get rid of mold in the house. However, before you agree to something, carefully inspect the room. Perhaps the cause of the fungus is the raw corners of the building, or additional humidity, or lack of proper ventilation. In addition, the visible manifestations of the fungus need to be removed by yourself.
If you do not value your health, you canleave the fungus. He himself will calmly develop, and you suddenly start to appear disease. In addition, the residential building will also slowly begin to deteriorate.
What causes the fungus?
Combating the development of fungus, mold
Now let's look at how to removemold in the bathroom. The fungus is deposited on the walls and at the junctions between the tiles. The reason for its presence is high humidity combined with increased (up to 20 degrees Celsius) temperature. Therefore, you can always feel a strange odor. After finding out the reason, you can start acting. In most cases, the so-called ventilation window is clogged. It must be cleaned, so that the air circulates sufficiently.
Well, if the mold is on the walls. How to deal with it in this case? You can contact the manufacturers of antifungal chemistry, which with a smart look you will be told that will not give the expected effect of traditional vitriol whitewashing. Even if you add cling to the solution. And ... they will be almost right.
However, the desired result can be achieved by applying several proven methods.
1. Places where moisture enters, you need to carefully investigate. If a source of moisture is detected, this source must be closed and insulated.
2. Walls with spores of the fungus should be well dried. This hampers their development.
3. Actually the fungus itself needs to be removed from the walls. And here you need some preventive maintenance.
4. First you need to carefully scrape the plastered surface, where the fungus settles. Up to the concrete. Strip off the remains of the loose layer (here spores also spread).
5. Dry the walls, and then proceed with the final cleaning with antifungal chemicals.
At the beginning of the article, we wondered ifmold on the walls, how to deal with it? The first method is the treatment of mold accumulations with a blowtorch. It is also possible to apply a formalin composition in mold proportions: a quarter of formalin (40%) per 10 liters of water. And then walk through a solution of copper sulfate (10%). Well, if you trust industrial compositions, you can use a mixture of "Stromix".
Finally. Primary elimination
You can also use other methods ifthe fungus has not yet spread quite strongly. For example, the walls are wiped with vinegar or hydrogen peroxide. True, the problem will disappear only for a short time. But for the first time this is a good and effective way.
Summary of all said
Mold is one of the harmful forms of fungus. Let's say you saw mold on the walls. How to deal with this? It must be removed so that there are no diseases. Good ventilation and drying of premises does not allow the appearance of mold. It can be removed with special compounds, after having thoroughly cleaned and dried the walls.
</ p>