How to use potatoes for potatoes

Many summer residents in the old manner are used forhoeing potatoes ordinary hoes. Meanwhile, in our time, it is not necessary to apply a huge amount of physical effort and lose a lot of time for such a procedure. To automate this process, potato hoggers are produced. This equipment is divided into three main types, each of which has its own pluses and minuses. Let us consider in more detail the design features of these mechanisms and the features of their use.

The simplest and cheapest equipmentare potatoes for potatoes with a constant width of capture. They are not very convenient to use, but you can still process a small potato field with them. At the same time, it is necessary to take into account the width of the dump already when planting potatoes, otherwise it will be impossible to carry out hilling using this mechanism. Do not use this tool on too wet ground. The ground will stick to the blade and work will be problematic. This equipment is intended for small-capacity motorboats - up to 3.5 l / s.

The second kind of such tools is hillers forpotatoes with variable widths - is most common. The working tool of this mechanism can be adjusted to any width of the rows. To move it requires a fairly powerful motoblock - more than 3.5 l / s. Work with its use can be done on wet soil. At the same time, this equipment does not dry out the soil as much as the first type. However, it costs more and, of course, requires more energy.

The most convenient for today are considereddisc hillers for potatoes. This is the easiest type of equipment. They are unusually convenient to operate. Adjusted they can be under any width of rows. On them, less earth adheres, and the crests with their use are obtained above.

Often the planters plant potatoeshillocks of this particular type. With the help of them the ridges are cut, and then the tubers are planted either in the ridges or in the furrows, as someone more suits. The landing material is covered with soil by backing the motor block. It is worth such equipment is much more expensive than the first two types of hills. However, given their extraordinary effectiveness, it is most expedient to use them for treating potato fields.

In addition to hillers for motoblocks, there are alsomanual options. They are much less convenient to use. Many craftsmen make similar equipment themselves. The width of the gripper is not adjustable. However, during the work, the width of the soil can be changed to cover the tip of the hiller more or less into the ground. If the rows are narrow, you do not need to put too much pressure on the handles. In the design of these models are provided knobs in front as well as behind. When hilling equipment is moved by two people. Some workers pull in front, another pushes behind. Such a mechanism can only handle small areas, since a lot of physical effort is expended.

Hilling and planting of potatoeshaymaker-motoblock (as well as manual version) significantly reduces the time and effort. A little to spend and buy such equipment for the suburban area, of course, is worth it.

</ p>