Balconies with removal - rational expansion of the balcony area

Many people in their household have a loggia orbalcony, which is most often used as a kind of warehouse, where you store unnecessary boxes, cans, old things and many other items. But you can use these rooms for their direct purpose, that is, create something like a small room where you can comfortably place a small table and chair to drink coffee or tea and admire the surroundings.

This idea is quite feasible. For this purpose, balconies are created with the removal, the arrangement of which is based on the rational expansion of the balcony space by moving a unique modern glazing system to the side of the street with the implementation of a small removal of the fence outwards at an angle. When constructing a balcony with removal, this offset should be created so that the size of the room does not decrease, and the sill was installed from the outside at the resulting distance. To date, very popular are loggias and balconies with removal.The procedure is to securebrackets for balconies on the rails of fences, and for loggias - on the parapet. After that, the windowsill is mounted on them, as well as the installation of a frame with a visor in the upper part. The removal of these frames on the windowsill can be carried out from the front and from the sides of the balcony.

It is known that the displacement of the glazing can becarry out both from the front side, and along the perimeter of the loggia or balcony. It should be emphasized that the size of the optimal width of this removal in most cases is 20-25 cm. In this case, the strength and strength of the obtained design with design characteristics are best combined, and the sill has a functional width of 25-30 cm.

Glazing of the balcony with the removal, which isin the removal of the glazing line, involves the installation of the frame using specially made brackets, which are attached to the concrete parapet by means of nails or screws. To carry out fastening to the surface of metal, welding is used. Brackets are located at a distance of at least 60 cm.

Balconies with removal must have a strong fence, to strengthen which in some cases, use welding, as well as laying a brick or block.

When installing bracketsIt is necessary to provide an ideally horizontal base for effective strengthening of the windowsill. To do this, you need to check the ground with a level. Then the top element of the structure is attached to the upper slab of the balcony. This part is guaranteed to protect the balconies with the removal of leaks.

In this case it is necessary to carry through theFastening of sheet metal to the glazing frame and to the upper balcony plate. Then, the outer edge of the metal strip is bent, which makes it possible to hide the junction of the glazing frame with the balcony visor. After that, you need to tighten the seals carefully with a silicone sealant, and cover the outer side of the frame with a plastic screen or plastic siding. As a result, the unity and combination of the received design with the design concept is achieved, and the balconies with removal are protected from blowing and draft through a reliable frame skin.

</ p>