Gazebo with fireplace: project, construction, decoration

The arbor has become almost mandatory attributefor private houses or suburban areas. It is built to organize outdoor recreation, but this structure protects against wind, direct sunlight or precipitation. Recently, the gazebo with a fireplace became very popular. The fact that domestic users of such designs prefer to combine a pleasant conversation with the preparation of dishes on fire and a feast. Therefore, in projects of arbors, it is necessary to make sometimes very important changes in order to realize all the ideas for improving the level of comfort.

General Provisions

To begin with, you need to understand that such a supplementis radically reflected in any typical project. If you create a gazebo with a fireplace, then first of all it affects the dimensions of the structure. It is necessary to allocate not only a place for brazier or other source of open fire, but also create a kind of security zone.

It is also very important to organize the system correctlyventilation and discharge of carbon monoxide. Otherwise, all rest can turn into mass poisoning. Some novice builders very often in the creation of such designs neglect the rules of fire safety, and this results in unforeseen fires and fire.

Particular attention is paid to erectionfoundation. The fact is that the gazebo with a fireplace requires a special approach to making the base. The structure will have to withstand increased loads, constant temperature changes and external influences.

Project

Typical project of a gazebo with a fireplace usually consists offrom several parts. It includes a drawing of the pile field, since this type of foundation is considered optimal for such structures, as well as a plan for the erection of the structure itself and a separate sketch for the manufacture of a stove or other device for an open fire source. Given this, you can immediately understand that a simple person, without work experience, can not independently create such a project. However, even with a little technical preparation or with the presence of such schemes, it is possible to choose an option ideally suited for a specific site.

Base

It is best to create a foundation for such structures from piles. It is built very quickly, does not require large costs for installation and allows you to build the building right after installation.

• First you need to make ground alignment. This is very important if the masonry of the fireplaces is done on a separate basis, although such an action makes it possible to correctly position the piles.
• At the next stage, it is necessary to make holes in the ground at the location of the intended location of the supports. Here the project of a pile field and a special device for drilling are useful.
• If the fireplace with a gazebo is made on the same base, then the supports must be located and below it closer to each other.
• To create such structures it is best to use screw piles. They screw it with a special device. It is important to note that two people will cope with such work.
• Next, you need to re-band the piles. They are connected along the perimeter using the channel and welding. You can also pour a kind of armopoyas of concrete. Which will perform the functions of the substrate.
• In the performance of these works it is worth beforehandto worry about how the roof supports will be fixed and installed. This is especially important if you make a private gazebo with a fireplace, as you need to think over the fixation of several elements.

Installation of supports

The easiest way is to use a profile pipe to create a pergola. This material is quite practical, it is easy to work with, and its cost is considered optimal and comparable to its quality.

To install supports from the profile pipe is betterall on piles, welding them or using bolted connections. However, it must be remembered that barbecue fireplaces may also require a special connection with the supports, which means it makes sense to create adjustable fixation points.

All the supports must be connected with each other. To do this, you can also use a profile pipe with smaller dimensions along the end. It is welded to the columns on the lower level, in the middle and above. This will give the structure additional strength and allow you to specify the distance for subsequent fixation of the partitions.

Floor

This process should be carried out taking into account,that in future it will require a laying of fireplaces. It is best to immediately create a small base for the source of fire and protect it from heat transfer and expansion. Some masters suggest using a special damper tape and a refractory insulator. However, to save money, you can simply leave the technological gap with the placement of asbestos sheets in it.

It is recommended to make flooring from the board. It is enough just to lay on the perimeter of the base of the lag, on which the material is nailed. If the appearance of the floor is important, then experts advise to perform a finish coating from the board. After that, the floor should be treated with a special impregnation, which will protect it not only from the effects of moisture and insects, but also from fire.

Fireplace

Even the simplest construction of a fireplace isa very complex and responsible process that requires the master to own certain skills and knowledge. Considering this, many people prefer to turn to professionals who are not only good at their job, but also provide a guarantee for it.

To solve a similar problem with minimalcosts can be used already ready-made designs, which recently can be purchased in the market or in special stores. They can be used as stand-alone products or can be sewn with a brick, giving a good appearance.

Roof

The most beautiful pavilions are usually differentroof construction. Therefore, to approach this stage, construction is necessary with imagination. The fact is that even using the cheapest materials it is possible to build a structure that can become a real work of art and stands out on the site.

The easiest way to make a roof frame is frommetal profile. It can be laid almost any cover, and the construction itself will be strong enough. Most masters are inclined to the fact that the roof needs to be performed from a metal profile. Modern manufacturers make this material with different colors, defined embossing and excellent protection from external influences. However, during installation, you can show your imagination and make the styling an original technique that will allocate the entire structure.

Partitions

If you create a winter gazebo with a fireplace, it is worthmake special partitions that would cover the structure along the perimeter. You can also make a door so that the inner room is protected from the cold. However, it is very important that all these systems can be removed or opened, since in the summer they will be superfluous and completely deprive the pleasure of rest in the open air.

To save money, you can manufacture partitionsfrom old window frames. With a certain treatment, they look very good and perfectly protect not only from the wind, but also from the cold. If you have a large budget, you should use wooden panels or other materials that have a good appearance.

It is most practical to create partitions thatwill be protected from the floor to the middle of the height of the pavilion. The remaining space can be covered with a special dense film or cloth. It is very practical and convenient, because it allows you to quickly adjust the resting place to any weather conditions and seasons.

Recommendations of specialists

• All fireplaces, barbecues or stoves must be separated from other elements of the structure in order to reduce the risk of fire due to a rise in temperature.
• If the construction is made of wood, then it must necessarily be treated with special compounds that reduce the risk of fire.
• It is desirable that the base of the fireplace risesabove the floor covering a few centimeters. On it it is necessary to put waterproofing immediately to protect the structure from moisture from the bottom, and to treat it with a special composition to reduce the thermal conductivity.
• It is very important to choose the right place forinstallation of the arbor. The fact is that the smoke from the fire can interfere with others or go to other buildings. In this case, special attention is paid to trees, since such a neighborhood can adversely affect their life cycle.
• When creating a roof,her chimney. The pipe must not come in contact with the structure. It is best to use special segments to sell such a passage, which are sold in the construction materials markets. With them it is much easier to work and such a technical solution will save and protect the building.
• Tables and benches in the gazebo should be placed oncertain distance from sources of fire. In fact, before the fireplace or barbecue there should be space, which will be necessary for usability and protection from heat.

Conclusion

Even the simplest gazebo with a fireplacemanufacture includes stages that require the presence of certain skills and abilities. Taking this into account, it is recommended to beginner masters to enlist the support of specialists and prepare in advance a high-quality project, compiled by people who are knowledgeable about this. Sometimes it is worthwhile to go for small additional expenses in order to get a beautiful, practical and, most importantly, safe building. The same applies to interior design, as the finished construction will only look in combination with the landscape itself.