The choice of a shower for a dacha needs to be approached fromspecial care, because this device you will use for sure very often in the summer. There are a number of factors that are most significant for most buyers:
- tank capacity;
- the function of heating water;
- weight, appearance and reliability of the structure.
It is possible to describe the design that a shower hasfor a heated residence. It's worth starting with the frame. Usually it is welded, made of pipes 20 * 20. It is painted with enamel, most often black. Since this is a street structure, there is no powder paint used here, which can suffer in the winter. And put on top of the powder paint some other owner will be quite difficult, that's why you should choose the enamel. With the help of screws, the frame can be sewed with sheets of high-quality opaque cellular polycarbonate. This material is not afraid of temperature fluctuations and precipitation, which allows you to leave a shower for a summer residence with heating for the whole winter on the street.
The frame is inserted into the plastic pallet. In this case plastic ABS is used. We can consider in more detail the design of the pallet, which has the following form. The plastic pallet is put on a plywood frame, the thickness of which is 10 millimeters, and boards are plied to it, the thickness of which is 40 millimeters. They must necessarily be treated with an antiseptic. Shower for a heated villa, which has such a design of the pallet, allows you to fully withstand loads of up to three hundred kilograms. On the place for changing clothes, there is a platform on the pallet, located one and a half centimeters above the level of the place for washing, so water will not soak up the shoes left on it. The pallet has a place for draining the water, so that the drainage device is as easy as possible. You can dig into the ground some capacity that does not have a bottom, on which to install a shower for a summer cottage with a heated drain over it. This will prevent the appearance around your summer cottage soap pool. In addition to the drain, you can attach a siphon, through which water will be diverted through pipes to the right place in your summer residence.
On the frame is installed a flat tank, capacitywhich is 200 liters. It also serves as a roof. The tank is made of a similar plastic ABS, the thickness of the walls is 5 millimeters. It is black in color, as is the pallet. Standard equipment requires a watering can and a ball valve. A watering can is installed at an angle of 45 degrees, which is quite convenient, and also saves space. Completing the heater with a thermoregulator will make the summer shower into a functional device that has a heated tank. The power of the tan is 1.2-4 kilowatt, the heating time is 1.5-3 hours. The tank is filled with a hatch on the roof. Precisely on the same principle, a water dispenser with a heating for the dacha is arranged, only in this case the power of the TEN is not so high.
The use of such modern devices greatly facilitates the life of the summer resident.
</ p>
