Ondulin - what to cut, step-by-step description, recommendations and feedback

For today in our country existsa huge number of building stores, where you can buy a wide variety of goods. Modern roofing materials gradually supplant the slate habitual for most adults, and this is explained by many advantages. Today, roofing from ondulin is particularly reliable. Some may first hear this term, but professionals who have already tried the material in action, admire its strength, reliability and convenience. So what kind of material is it, how to use it correctly and the better to cut the ondulin?

General information

This material has long been usedbuilders only as a means to repair the existing roofs. But over time and the evaluation of all its advantages gained independence and began to be used as a separate version of the roof lining. Manufacturers of ondula provide a guarantee for 15 years of using roofing material, but in reality, following its characteristics, one can draw conclusions about a much longer service, up to half a century.

Ondulin (rather than cutting the material, will be described in detail later) does not contain asbestos, typical for the production of slate sheets and very harmful to humans.

This makes it an eco-friendly version of the roof deck, able to withstand any weather conditions:

• hurricane wind up to 53 m / s;
• the strongest heat;
• severe frosts;
• heavy weight of snow on the roof.

The material is made of bitumen and saturatedcardboard production waste. The dyes for ondulin are also chosen to be exceptionally eco-friendly. You can find a wide variety of shades of black, brown, red and green.

Main advantages

In addition to the qualities of the roofing material already listed, a number of other characteristics should be attributed to its strengths.

So, ondulin (what to cut and how to do it correctly, will be considered below) has:

• low level of moisture absorption;
• wide choice of color design;
• resistance to fungi and other biological microorganisms;
• resistance to alkali, gases, acids and so on;
• ecological compatibility;
• ease of installation and cutting;
• durability.

In general, the installation of the roof of ondulin is similar to the similar process of laying slate, but it has a number of features in connection with the material of making the roofing shelter.

Material properties

Many do not dare to acquire this optionroofing for personal needs even after getting acquainted with the advantages listed above, as they doubt whether it is possible to cut the ondulin and how to do it correctly. The question is actually very urgent, since it is on how much the work is done qualitatively that the further indicator of the service of the entire roof covering also depends. With improper cutting or laying, even all the advantages of the material become insignificant, because the whole roof will not last long.

If we study in detail the ondulin, than cut itand how to put it right before starting work, even an inexperienced roofer can achieve good results. The material, if properly installed and operated, can last up to 50 years, which means that the roof will not be in need of repair all this time. Such indicators are achieved due to the high strength of the roofing shelter, its endurance, ecological compatibility, heat and moisture insulation, lightness and fire safety. As the roofing material onduline (than to cut it in detail described below) is ideal for operation in all weather conditions, but according to the certificate available for it, the material can ignite at a temperature of 250-300 degrees, this should be remembered for the owners of dwellings in especially hot regions.

What to use for cutting

To answer the question, what to cut ondulin correctly, do not go deep into the properties of the material.

You can use for this:

• a saw blade;
• electric jig saw.

How can you cut the ondulin yet? If you just need to fit individual sections of the roof to the unevenness on the roof or cut the sheets in a straight line, then you can use a conventional construction knife or a hacksaw. The choice of a working tool depends on the future workload. Thus, electrical devices that facilitate human effort for the task, are ideal when cutting large amounts of ondulin at once. It is important to choose a circular saw with a large number of teeth on the circle and a hacksaw with large teeth.

Correct cutting

To avoid messing up the material and cutting itaccording to the measurements of the roof, it is necessary to carry out all work only on a flat surface, below. Installation and delivery of material to the top should be done with the already cut out sheets. For accuracy, before cutting the insulator to the roof, it needs to be properly marked out, which should also be done on the ground. To make the lines even, you can use long wooden slats more than two meters or another, uncut, sheet of material. All places of incisions should be marked with bright contrasting chalk, and cross lines with risks on the projecting waves.

Speed ​​of work

If you need to put ondulin on the roof inshortest terms and at the same time do not spoil its sheets in a hurry, cutting can be done at once in batches. Since the material is light enough, an electric jigsaw or saw will cope with the cutting of several sheets at once, the main thing is that the diameter of the disk is sufficient and all the sheets are securely fastened together.

Before cutting the ondulin at an angle, in a straight lineline or other means, it is necessary to periodically wet the cutting blades of the devices with water or machine oil, this will speed up the cutting process. In extreme heat, it is recommended that you leave the hacksaw in a bucket of cool water until it is used.

To quickly clean the cutting elements fromadhered bitumen and continue working, it is necessary to wet the linen in kerosene, toluene or a solvent. For electrical appliances it will be enough to pass from time to time on the wooden surface, making it a notch, which will clean the teeth.

Why you can not cut the material directly on the roof

First of all, cutting directly on the roof createsprobability of accidental damage to other components of the roof, because the saw can jump off and cut the load-bearing beams or flooring materials. It is also difficult to fix at the height of the ondulin for accurate marking, because under the slope it can constantly move out.

Reviews

Among all those who used this material forsheltering the roofs, the absolute majority remained quite a result. First of all, the cost of the material is high and there is no smell, even with strong heat in the summer. Many are pleased that during the rain you can not hear the roar on the roof, and during the strong rise in temperature, the roof does not crack. The disadvantage of the material can be called unless its fading with time. Even after a few years, this will be noticeable to the naked eye, but its properties do not lose onduline. In general, the roof made of such material leaves a restrained and positive impression, since the cardboard of many scares the risk of ignition, and the softness of the material on heating is even more alarming, but cases that would have confirmed the fears were not yet there. In reality, the material demonstrates only its positive qualities.

Conclusion

Based on the foregoing, it should be noted that the cutting and cutting of the material can easily be carried out even non-specialist in this area, the main thing - to follow the advice:

• choose the right tool;
• mark and cut sheets on a flat surface of the earth;
• periodically clean the cutting blades.

If there are doubts about your own abilities, thenit is better not to risk and entrust the installation of the roof to professionals. Moreover, at present there are quite a lot of organizations that provide a variety of construction services.

</ p>