Stainless steel mixer feed
Most often when repairing a bathroom or kitchenThe concealed lining for mixers is used. It is made using flexible hoses. But what if the design solution involves an antique-style interior using copper or bronze faucets? Or is it not possible to make a hidden water supply system? In such cases, the feeder for the mixer is rigid. It is worth considering this topic in more detail.
What it is?
The mixer feed is a product made in the form of a tube with a diameter of 10 mm.
Types of materials
There are several options for the execution of such products:
- Brass is an alloy of zinc and copper. The color is in the range from red to yellow. Good thermal conductivity, resistance to abrasion, resistance to corrosion and high temperatures. If no protective coating is applied, it may blacken over time.
- Copper. The color is golden-red. Has a high resistance to corrosion, but over time, in damp areas can acquire a greenish tint. Excellent thermal conductive and electrically conductive properties. Resistant to chemical attack, mechanical abrasion.
- Stainless steel. It has high anti-corrosion properties and strength characteristics. Has a shiny metallic surface.
As can be seen from the listed materials, the connection for mixers has several advantages.
Advantages and disadvantages
A number of positive properties can be distinguished:
- Resistance to corrosion. This is important for wet rooms, especially when using conduit on the piping.
- Smooth surface. Do not accumulate dirt, it is easy to clean.
- Resistance to chemical attack.
- Presentable view.
- Durability. In comparison with flexible, the service life is 4-5 times longer. The feed for the mixers is rigid and is used up to 20 years. Flexible 3-5 years, depending on the quality and the manufacturer.
- Hygiene. When interacting with water, it does not release harmful impurities into it.
The disadvantages include installation, but this is a controversial issue.
If the pipe size is correct, thenThere should not be any difficulties during installation. The price for such products is much higher than the cost of analogues. But taking into account the service life, we can say that the cost justifies itself. Mobility - in case you need to move your plumbing or household appliances, you need a thorough rework. As you can see, the dignity of the hard cabling is obvious.
Scope of application
Stainless steel mixer feedIt is used not only for domestic purposes, but also for institutions that are subject to increased sanitary standards. This is due to the fact that the surface is smooth and conveniently washed. If we consider flexible liner, then it has an interlaced or corrugated structure, in which dirt and dust can accumulate. The use of pipes is most often in the following areas:
- Medical facilities: hospitals, sanatoriums, polyclinics, laboratories.
- Children's institutions: schools and kindergartens.
- Sports and health centers.
- Stations, airports.
This is only a number of institutions using such a podvodku.
Very popular is the use of suchproducts for domestic purposes. Cranes made under the antiquity have a beautiful view, and to complement this effect, some designers use open-end liner made in the same style as the faucets.
In the kitchen, the intensity of usewater supply implies a greater likelihood of equipment deterioration, plus the room itself is an aggressive environment. Care for furniture and equipment should be as comfortable as possible. Therefore, the connection for the mixer in the kitchen of a hard view is the most optimal option.
Nuances of selection
There are a number of subtleties for the selection of stiff eyeliner:
- Exact size. Deviation in greater or lesser side will entail difficulties with installation. Therefore, before buying should make accurate measurements. Also it is necessary to pay attention to the diameter of the fittings. They must match the size of the main line and mixer.
- Manufacturer. Before buying, you should review the reviews and options.
- Material. It all depends on the design idea and the price category, as well as visual preferences.
In general, the main difficulties can arise during installation.
Installation
As with conventional water supply, there are two versions of the system - hidden and open.
For the first one, you will have to trowel the walls, or sew them in plasterboard boxes. For open piping, provide a fastening system to the wall.
Before the installation, the plannedwiring. After the pipes are held, the masters install an old mixer and collect the entire system. Then all the fittings with the winding of the foil tape or the pakli are fixed. If the liner is hidden, then seal the stitches with plaster. The time is allowed for the solution to solidify. Unscrew the old mixer and mount a new one. Turn on the water, check the tightness.
Installing an entirely new system is much easier than replacing flexible hoses with rigid hoses.
Replacing the old liner
If the decision is made to change the flexiblePulling on a rigid one, you should choose pipes of the required length. If the size is non-standard, you should make a cut according to the required parameter. Then connect the collet. The details are worn before cutting.
There are cases when the length is less than necessary, you have to weld or buy a new one.
As a rule, the installation of rigid cabling is trusted by professionals, due to certain difficulties. An experienced master will determine how best to install with minimal risk of damage to the product.
Manufacturers
The market is replete with firms that specialize inproduction of elite liner. One such manufacturer is Grohe (Germany). The "Groe" mixer feeder differs in ergonomics, reliability and durability.
The manufacturer himself recommends, for Russian operating conditions, to install a water purification filter before inserting it to maintain the reliability of the water system.
There is another famous manufacturer of this kindeyeliner - Remer (Italy). This company has long been on the market and has a full production cycle. The quality control begins with the evaluation of raw materials and is monitored throughout the entire production cycle of the product. That's why the piping for copper mixers Remer has established itself as a quality product.
When buying such systems, you should pay attention to the completeness.
Branded original podvodki have a complete set, including gaskets. Counterfeits can be incomplete.
Cost and reviews
The price of hard-wiring varies from 1200 rublesand higher. This cost is due to the high cost of material, in the first place. And, accordingly, the products of well-known brands will include the price for the brand itself. But it guarantees the quality of the products.
According to reviews, the main problem of installing such systems is precisely the fit of the size. Otherwise, consumers confirm the reliability and durability of such systems.
</ p>
