"Andalusia" - high-quality metal roofing

In modern construction, a widedistribution has received a profile metal, which decorates the roofs of industrial premises, cottages and a variety of buildings. This material has become popular because of the simple installation and affordable prices. Most recently, the market appeared "Andalusia" - metal with hidden fastening. It is made of high-strength steel on Finnish equipment.

Production

The entire manufacturing process consists of severalstages, which involves rolling metal. Then protective coatings and polymers are applied. Then the profiling of the shingles is carried out, and at the outlet it is packed. Only Finnish equipment is used for profile production.

Characteristics of metal

This product differs from previous analoguesfastening. "Andalusia" - metal, which has an external resemblance to natural tiles. The sheets have Z-shaped fasteners. Symmetrical wave and high strength of the material makes this metal tile more attractive for customers.

The durability of the roof is ensured by fastening, as a result of which the coating is sealed. The roof is not corroded, and therefore does not require periodic repairs.

"Andalusia" is a metal tile, which differs in height, width of a wave and various color palette.

Before coating the roof, it is necessary to preparebase. First of all, check the correct installation of the rafter system, measuring the diagonal of the roof slopes. Roll out a layer of waterproofing, cover it with rafters and nail the film with nails. After this, the crate is executed.

Then set the bottom valleys. In places such as lanterns, chimneys, attic windows and dormer windows set aprons. If the roof slopes are rectangular, mount "Andalusia" (metal tile) from any angle. At the first sheet, attachments with mounting holes are bent. Begin to screw from the middle hole. Then the mounting protrusion enters the groove of the previous sheet. The layout of the sheet depends on the shape and angle of the roof.

Ventilation device

First cut out the hole where the ventilation will be located. Then the silicone is lubricated with a passage that will be inserted there. Strengthen the very ventilation, and then level and tighten the screws.

Care of the roof

After the metal tile is installed"Andalusia", the installation of the roof is finished. After that, it is absolutely necessary to clean the roof of debris and dirt. It is necessary to make sure that the roof has no mechanical damage. Manufacturers of this profile say that if used properly, the roof will last 30 years. And to ensure the safe maintenance of the roof, it is necessary to install transitional bridges. Also recommend to install on the metal roof snow holders, and above the windows, this procedure must be carried out necessarily.

Instruments

The following tool is required for mounting:

• hacksaw;
• a hammer;
• a jigsaw;
• nibler;
• screwdriver;
• drill;
• perforator;
• Bulgarian;
• level;
• hand scissors.

So, the metal tile "Andalusia", the price of whichThe same, as well as at a usual profile, is a modern product of enough high class. A wide range of models and 40 shades of cover allow any roof. This material makes it possible to create such a roof that will look like a single canvas.

</ p>