Filter for kitchen hoods: a review of models, reviews

Kitchen extractor is needed to cleanthe room from the unpleasant odor, the products of combustion and smoke that form during cooking. Her work is based on a filter, which can be coal, or fat. It protects the internal surfaces, in particular the engine, from contamination and ensures the normal functioning of the device. The filter for hood extraction in the kitchen is indispensable, especially if the ventilation system is closed.

Working Principles of Hoods

There are hoods, which, pulling in the steam,output it through the vent. Their principle of operation is to completely remove contaminated air and replace it with clean air. But their installation requires connection to the vent pipe.

The circulation hoods work differentlyprinciple. A powerful engine draws air in, with the help of an installed filter it cleans and returns back to the living room. That's why these devices require the installation of a high-quality filter. A kitchen extractor without a duct does not require complicated installation and costs much less.

Types of fat filters

The fat filter for extracting in the kitchen is necessary for cleaning the air flow from impurities. Otherwise, the suspended fat particles will damage the internal elements of the machinery and lead to its breakdown.

If you do not install the filter, then after a coupleweeks of using the hood, all its insides, including the motor, will be covered with a thick and sticky layer of fat, which is difficult to clean and has an unpleasant odor.

Fat filters are divided into disposable and reusable. In connection with this fact, the material from which it is made is also different.

Material for the grease trap

Flizelin or special paper with impregnation -budget option, which can be found in the hoods of low price category. As a rule, these are flat-type devices. Operation continues until the filter is completely contaminated. Its cleaning is inefficient, so it is simply replaced by another.

Acrylic filter. Such material is amenable to cleaning, but due to fragility after several procedures it will need to be replaced with a new one.

Aluminum filter. This design is reusable and is distinguished by its durability and reliability. Such a filter will last a long time, as long as the extractor is operated. These filters are installed in devices located in the high or middle price segment. The grease separator must be removed and cleaned thoroughly, so that the extractor can operate at full capacity.

Selecting a fat filter

In the stores of home appliances you can find a sufficient variety of models and manufacturers of grease traps. Sometimes they are difficult to understand and understand what they are different.

The most common brands that are heard by the consumer and most often represented on the market are: Cata, Gorenje and Kronta.

Kronta filters

Kronta, according to consumers, is oneof the best brands, which is represented by various models of hoods and filters to them. All samples are made exclusively of aluminum with a multilayered metal mesh.

Such filters are quite effective. They completely retard all evaporation, protect the internal elements of the hood and the kitchen set from fat particles.

Filter for kitchen hoods from Kronta, judgingon reviews, it is well cleared by usual washing-up liquid. It can also be washed in the dishwasher. If you regularly take care of such a filter, it will perfectly handle air purification and will successfully serve for several years.

Fat models from Cata

The Spanish brand supplies filters fromanodized aluminum, where six layers are provided for air purification. A kitchen extractor with a filter without a tap requires a similar design, as the cleaned air again gets into the living room.

According to reviews, kitchen hoods with a filter suchplan have high-quality filters that can be cleaned by any means and washed in a dishwasher. But some complain that the layering makes it difficult to clean up completely.

The aluminum grille prevents grease from entering the engine and the interior of the hood remains clean.

Italian brand Gorenje

Fat filters produce also from aluminum,therefore they are reusable. They completely prevent the ingress of dirt to the motor blades, so the hoods are protected against overloads in case of contamination. For the convenience of users, they are available in different sizes, so they are universal, as they are suitable for many models of hoods.

Carbon Filters

A kitchen extractor with a carbon filter isthe most effective, if you need to quickly refresh the air and get rid of unpleasant odors. Often they are called antiphasic or absorptive. This fact is due to the fact that the active carbon included in the filter is able to absorb and absorb various odors, vapors and fatty particles.

Coal is a natural absorbent. It is completely safe when used for its intended purpose. He not only absorbs smells, but also reliably keeps them inside.

Kitchen extractor with charcoal filter, and reviewsusers confirm this, has one drawback. To keep the hood working properly, the filters must be regularly replaced with new ones. But here their cost can differ. Depending on the manufacturer and the quality of assembly, the price can vary from 250 to 2500 rubles.

Need to replace the carbon filter

It depends on the quality of the filterfunction of the hood. As it gets dirty, it becomes denser and therefore it is difficult for air to pass through it. Therefore, it is necessary to replace the cartridge in time.

If we consider the standard terms, then inthe average one charcoal filter is able to effectively purify the air for 3-4 months. But more detailed information is provided by each manufacturer in the instructions to the cartridge.

So, the product from the brand Elica requires replacement every two months. But the filter from Elikor will serve all four.

Of course the regularity of replacement depends not only on the brand and manufacturer's recommendations. The frequency of using the hood and the way of cooking is also important.

If you need a carbon filter for drawing onkitchen with a longer service life, it should be considered as a purchase brand Krona, which guarantees perfect work up to a year. The filter from Gaggenau is changed at the manufacturer's recommendation twice a year, and the cartridge from Bosch once a year.

It should be remembered that usually in a set of hoods witha carbon filter does not provide an additional copy. Therefore, after complete air purification, it is recommended to leave the device switched on for another five minutes. In this way, the lifetime of the carbon cartridge can be increased because at this time the moisture residues are removed and there is no caking of the absorbent.

Built-in hood models

For many of us, the aesthetic properties of the kitchen space are important. Kitchen hoods built-in with a filter give more opportunities to provide comfort and refinement to the room.

Models have a sliding carriage,which is able to absorb more polluted air. Many users and experts recommend paying attention to models equipped with two motors. In this case, ventilation will be more effective. Filters for recessed hoods are meant to be reusable, aluminum.

Care of the filter

User comments on kitchen hoods withfilter indicate that if they are regularly cleaned, they will work much longer and more efficiently. If a disposable grease conditioner is installed, it must be periodically changed to a new one. Reusable is cleaned with detergent or placed in a dishwasher.

Clean the fat filter

To filter effectively cope with their duties, it must be cleaned. To do this, it must be removed and placed in a container with hot water.

To break down fat particles into water, adddetergent and the filter is placed for 20 minutes. Then it is cleaned with a hard sponge. You can use citric acid to remove difficult contaminants.

Replacement of carbon filters

Unlike the grease-suppressor, carbon filters can not be cleaned. They need only be changed. Of course, the task is not difficult, but rather laborious.

1. To do this, unplug the hood from the mains. Antifire filters are removed and cleaned.
2. The cassette, where the carbon filter is located, is usually fixed sufficiently tightly. It should be pulled out and extracted, directly, the filter itself.
3. Before inserting a new one, it is necessary to wipe the cassette with a damp cloth.
4. It is necessary to make sure that the new filter has risen clearly to its place, otherwise the work of the hood will be ineffective.
5. You can turn on the device and check that there are no extraneous sounds.

The filter for the kitchen hood providesefficient operation of the device. If the choice fell on the grease conditioner, then do not neglect the systematic cleaning. An air cleaner with a carbon filter will provide clean air and eliminate odors if it is replaced regularly, according to the manufacturer's instructions.