Due to neglect of the temperature regime, veryoften on the surface of the soleplate of the iron formed a plaque, interfering with ironing and leaving on the clothes dirty traces. Always use the instructions before operating the appliance. It should be remembered that wool is best ironed through wet gauze, and for synthetics or silk, it is not necessary to expose the heat. If the raid has already appeared, then the question arises as to how to clean the iron at home from the coke so that it is as fresh as new.
Basic cleaning methods that are relevant for all irons
The easiest and fastest method of cleaningsurfaces from the plaque is a special pencil. It is only necessary to heat the iron and spread its sole with this product, after a while the contamination will begin to melt. The surface should be wiped dry with a rag, and when the iron cools down, rinse with clean water to get rid of the chemical reaction residues. Pencil has a pungent odor, so you should clean in a well-ventilated room, and then wash your hands.
A very effective way of how to cleaniron at home, is the use of ordinary hydrogen peroxide. The procedure is carried out in gloves, it is necessary to moisten the cotton swab in the solution and wipe the sole with it. A deposit of hydroperite also helps from the deposit. It produces a strong unpleasant smell, therefore, having learned such a method as to clean the iron at home, and deciding to apply it, you must first go out with the device on the street. The tablet should be done on the dirt on the preheated sole, let it cool and wipe with a damp rag.
How to clean the Teflon sole of iron?
Fresh plaque can be removed with the help of conventionalsoap. To do this, it is necessary to heat the device, rub it with a tool and leave to cool. Then with a damp soft rag you need to wipe the sole of soap. Remove stains and vinegar. It is necessary to heat the iron to the maximum temperature and to grease its surface with a cotton swab dipped in table vinegar. The holes are wiped with cotton buds. In order to brighten the device, you should iron an unnecessary cotton cloth, on it all the dirt will remain. How to clean the iron at home from molten polyethylene? You need to wipe the dirty sole with a cotton swab dipped in a liquid to remove the lacquer.
How to get rid of rust on the sole of the iron?
Many housewives are interested in the question of howclean ceramic iron sole from rust. In some cases, use a cleaner "Silit". For this purpose, the household appliance heats up, turns the sole upwards, and the product is applied directly into the holes. After 10 minutes, dirt will come out of the holes, which should be collected with a clean sponge, the surface should be washed and wiped with a dry cloth. For this purpose, water with antinucipine in the calculation of 0.5 tsp for 250 mg of water. The solution is poured into the iron, which then heats up. Scale lags behind in half an hour. To prevent rust from appearing, you should use distilled water when ironing, and not the one that flows from the tap. It does not form scales inside the appliance due to its chemical properties.</ p>
