The main drawback of wooden houses is theirpropensity to shrink. Even after three years of operation, the value of this parameter can be 2-3%. The behavior of wood is also strongly influenced by the humidity and the degree of drying of the material before the construction begins.
By the way, what is a casing? In a wooden house - this is a special box, which is installed in the window or doorway. It is designed to compensate for mechanical stresses and distortions that occur in any wooden structure. Stresses are evenly redistributed across the box, as a result of which the window remains intact, and the doors will normally close.
If you plan to cut costs, you canperform a set-glue design, making it from trimming residual timber. Most often in this case, a jumper and sidewalls are used from the whole array, while the sill is made from a set-up bar. Install this structure on a special profile. Its shape depends on which geometric configuration is at the window or door. Specialists perform the installation of casing in a wooden house in a variety of ways.
It should be produced only from qualityand a well-dried wooden profile, as otherwise all your efforts will be meaningless. If you "lead" a poorly dried window, the effect will be similar to the shrinkage of the entire house. It is also desirable to impregnate it with an antiseptic. The experience of the builders shows that the casing in a wooden house in most cases is an absolutely necessary element, bearing not only a decorative but also a functional load.
</ p>