How to install a partition in the apartment with plasterboard

In modern conditions, partitions in apartmentsare installed more often. Many of us want to reschedule their homes, introduce unusual shapes into the interior and realize the design decisions they liked. Initially, it is worth considering where the partition in the apartment will be placed. Then the material of its manufacturing is chosen. This can be a magnesite sheet or an OSB plate. But the most common material for creating a septum is drywall. It is universal in use and easy to install, regardless of the room.

Drywall partition in the apartment must beis installed in compliance with very important rules. First you need to build a frame from the metal profile, and inside it put all the necessary communications. Then the plasterboard sheets are finished, which can be covered with a finishing coat. It can be pasting wallpaper or painting. Very often the owners of houses choose the radius partitions. They look stylish and aesthetic, thereby emphasizing the taste and originality of the owner.

The installation of partitions in an apartment can beis divided into stages. The first step is marking the location of the profile on the walls and floor. In the calculation process, it is necessary to take into account the severity of the parts that will influence the plasterboard structure. Then the sealing tape is fastened to the back side of the metal profile.

In order to install interior radius radiatorspartitions, drilled special holes at a distance of about fifty centimeters. The next stage involves attaching the frame to the floor. Next, a wall profile joins it and is leveled by a plumb or construction level. This stage ends the fixation of the frame to the ceiling.

The third step of installing the partition - the roominside communication networks. For this, a hollow is formed in the voids formed between the posts. It is designed to protect the cable from any damage and prevents the effects of fire in case of fire. This is facilitated by an evolved inert gas. If the partition in the apartment contains a corrugated box, you can easily replace the cable that has deteriorated. To do this, you need to tie a new cable at one end of the cable, and pull the cable out of the structure behind the other end.

The fourth stage is the skinning of the frameplasterboard. Self-tapping screws are used to attach it to the metal profile. It is necessary to ensure that they enter the frame to a depth of at least one centimeter. In this case, the head of the screw should be buried one millimeter in the metal sheet itself.

Before the partition in the apartment will befully clad, its interior space is filled with polystyrene foam or mineral wool. Then the drywall is attached to the second side in a similar way.

The final stage of the installation provides forapplication of the finishing putty on the surface and subsequent grinding of the layer. When all the main work is completed, you can cover the partition with wallpaper or paint in the right color.