How to breed silver, proportions. Pros and cons of substance

Serebryanka is a paint that has receivedThe name is due to its characteristic silver color. Often it is used to cover surfaces that want to be protected from various negative environmental influences. Also there is a heat-resistant paint, which is used for painting radiators, batteries and furnaces. Prepare serebryanku for use and you can yourself. But still there are many questions. How to breed silver? How to properly prepare the composition? With what substances it is undesirable to mix? Than to dissolve silver for painting of metal? The answers to these and many other questions can be found in the article.

What does the silver woman consist of?

Despite the name, it does not have a single drop of silver, but in fact silver in its composition contains aluminum powder. It turns out when grinding both aluminum and waste from it.

What is natural, this very silver is due to its beautiful color.

Causes of relevance

This metal-colored paint is often used both in industrial plants and at home. It is popular for the following reasons:

• Due to the fact that the silverback protects the material fromvarious damages, as well as looks impressive enough, it is applied to pipes, parts that are used in production, bridges and even boiler elements to protect against thermal effects. And it is completely wrong to think that only silver surfaces can be coated with silver. You can paint any other material. In its composition, it contains powder and varnish, if desired, all kinds of pigments are added.
• This is a very simple composition, but it has positive characteristics, which are absent in many other paint and varnish materials.
• There will be no difficulties in how to breed silver.
• Serebryanka looks good on the surface, and ifadd another pigment, as mentioned earlier, then you can get any desired color. Plus, the color will be very interesting. The layer leaves smooth, thin, and the film itself does not exfoliate.
• Holds about 7 years in the air and 3 years under water.
• Resistant against rust.
• It dries quickly.
• Is a non-toxic substance. But safety should also not be neglected: before working with serebryankoy should protect the respiratory tract and skin from getting into the substance. The room in which the painting is done should be well ventilated, or, if possible, work with the substance on the street.

Negative sides

As with any other composition, silveralso has its drawbacks. This is a fire hazardous substance, moreover, the danger of explosion is great. Hence, for safety reasons it is important to store silver from far away from open fire, protect from heating in the sun, keep in a well-closed jar and away from food, since they can soak up the smell of the substance. But I would like to note that this does not affect the quality of the coating.

How to dilute silver for painting

PAP-1 and PAP-2 are two types of silver, andthe difference between them is in the proportions of cooking. By the way, it is possible to dilute powder not only with varnish, but also with synthetic varnish. Therefore, depending on the possibilities, you can choose how to dilute the dry silver.

• PAP-1 - diluted with BT-577 varnish in proportion to 2 parts5 lacquer powder. Powder is poured into the container, and then a little lacquer is poured into it, this compound is thoroughly mixed. Even better, if you can use improvised tools, for example, a mixer. In this case, the preparation of silver will take a little time, and a minimum of effort will be expended. And you can not doubt that the substance will not burn out, and will also withstand high temperatures. This paint is stable at temperatures up to 400 degrees.
• PAP-2 - powder, which can be diluted with any varnish inproportions for 1 part - 3-4 lacquer powders. The process of preparation is the same as in the case of PAP-1. But the composition is too dense. Of course, you can apply it to the surface and in this form, but in order to save the substance it will be better to make the silver one more liquid. That is why it is very important to observe the proportions and knowledge of how to properly dilute silver.

At this stage, it is important to decide which methodpainting will be used. This is what determines how to breed silver. In order for the paint to become a normal consistency, it is bred with white spirit, turpentine or a solvent. If a nebulizer is used, the silver is mixed with the substance in equal proportions. But for painting with a brush or a roller, the composition is mixed in the proportion of 2 parts of paint per substance.

And if someone asks himself how to plant silver with a synthetic linseed oil, the answer is very simple: the proportions are the same as when using a varnish.

With what substances it is forbidden to mix silver

Serebryanku should never be divorced fromalkyd, as well as oil paints. Also it should not be applied on top of nitro-enamel and NBH. because the service life in this case will be very short. These two substances are poorly compatible, most likely, in the near future, the silver will come down or swell with bubbles on the surface.

Also it is incompatible with galvanized products. Serebryanka after a while will start to become covered by corrosion, and the product - to be destroyed. If nevertheless there is such a need, then the galvanized surface should initially be properly primed, and already on top you can apply paint.

Painting of metal

If someone asks a question, than to dissolve silver for painting of metal, the above mentioned composition will do.

It is more important to prepare the surface itself for painting. It should be absolutely clean, free from grease, without trace of corrosion and dust. The silver itself is applied in several layers.