Toilet bowl "comfort", technical characteristics and usability

The history of the toilet goes back even centuries -millennia. Even then, a seat was made of bricks, and for the queens, the decorated thrones and stools were made. Ancient China, Egypt and Rome - all cared about the recycling of waste. Today we use a variety of toilets, which have different designs and appearance. The word "compact", which is used in the title, indicates that the subject does not take up much space. Especially if the newly acquired model can be put not habitually in the center, but in a corner.

What are the toilet bowls?

Apart from the tank, the design, and shape, and color, andthe toilet bowl material is very diverse, as are their sizes. Also included are children's models. The toilet-retro, which has a drain tank under the ceiling, was revived again. A chain with a decorative handle allows you to make a cleaning in this case.

Modern toilet bowl

What concerns its characteristics? This is the material from which it is made, the height of the toilet seat, the structure (floor or suspended), the tank unit, the toilet bowl, the flushing method.

In the store it is advisable to carefully choose the toilet bowl compact "comfort". Technical specifications for all parameters include the following points.

1. Choosing a toilet bowl for the material. It can be either faience or porcelain. The glaze of both materials is exactly the same. Outwardly only a specialist can distinguish them. Porcelain is stronger and accidentally it is difficult to sever a piece from it. And if you drop something porcelain metal, not too heavy, then it will not break, like faience. Therefore, the service life differs by almost twenty years. Toilet bowl compact "comfort", the technical characteristics of which give sufficient practicality of the model, the load of this plan stands.
2. The height and appearance of the bowl. Usually it is made from 40 cm and above. But it is necessary to choose, having sat down on it and having felt, that feet conveniently stand on a floor. Usually a prefabricated toilet bowl is purchased, when the bowl itself is first installed, and then the tank. The negative point is that the toilet bowl with a tank occupy a rather significant place. If the width is 41 cm, the length can reach up to 75 cm. This does not always make the convenience toilet comfortable. Technical specifications for it of a different type are more difficult to find. The toilet bowl can be a bowl, in the form of a funnel and visor. At the bowl in the form of a funnel, everything that needs to be removed immediately falls into the central depression. This is convenient for cleaning. With a bowl in the form of a funnel, a toilet bowl is usually released and a compact "comfort". Technical characteristics: the size and ways of washing the bowl by the trigger are very important. In order to keep the bowl of the tank daily in perfect cleanliness, it is enough to attach a cleaning freshener to its inner surface. So there will be much less lime deposits, and in addition, an effect will be obtained that destroys bacteria.
3. On the device of a tank and a way of washing off. At the tank capacity of water 6 liters. The design can assume both a regular and economical drain. The drain button is divided into parts. If there is a water meter, it is more advantageous to stop at a two-level version. This will give noticeable savings. And on this basis, you can choose the toilet bowl compact "comfort", technical specifications it's allowed. Water in the toilet can completely wash the bowl over the entire surface, and this is called reverse, or circular, flushing. It is considered very high quality.

Main characteristics

The state standard has been developed, in accordance with which the toilet is issued a compact "comfort". Specifications GOST 15167-93 specifies for certain parameters: low water absorption, the glaze should be resistant to temperature, acids and alkalis, there should be no cracks, the hue of the color is uniform, the warping of the upper and lower surfaces is not more than 4 mm, the useful volume of the tanks is 6 liters, the load is maintained at least 200 kg. Toilet bowls are supplied complete with a reservoir and fittings for it. All these requirements are suitable for plumbing.

To her, of course, is the toilet bowl compact "comfort". Features of the standard They were created in 1993, and manufacturers work on them.

additional characteristics

In addition, you can see all the colors of enamels that modern designers offer. Bright fit the modern style, the dark is better not to choose, because they are less visible pollution.

Since the market of sanitary ware is extensive, it is always possible to select a product that will be convenient and aesthetically pleasing to all family members.