How to make holes on jeans to be beautiful?

Probably, jeans are the only kind of clothes,which can be worn for as long as you like, even without looking at the scrapes and holes that have appeared over the years. Moreover, favorite jeans that require repair can always be updated, there would be a desire, a fantasy and at least a little skillful hands. You can repair jeans in many different ways: you can zaptopyvat, paste applications, put patches, and you can ... dorvat them definitively. But it must be done so beautifully, that no one and a drop of doubt does not arise that this is a branded thing, and not an unsuccessful flight from the fence.

So, how to make holes on jeans so that theylooked spectacular? Before you start this exciting process, you need to decide in which places and what size holes you would like to contemplate on your pants. To do this, you need to put on your jeans and mark in small detail the location of future "jewelery" and their size. After the holes are scheduled, remove the pants back and prepare a simple tool for their "execution." You will need a pair of scissors, a blade, or a sharp clerical knife; needle; tweezers; a piece of sandpaper or ordinary pumice. Surely this good is enough in every house.

If you cut your pants with a blade or a knife,before making holes on the jeans, put a piece of cardboard or a board inside the leg to not cut the fabric on its back. Since you will certainly like the cuts with threads across, they will do it. Once you have decided what size this hole will be and where it will be located, you can start making it. To do this, make one cut at the point where the "ventilation" will begin, and the second one, where it will end.

The next step is how to properly make holes in thejeans, will be the creation of those very threads that are so wonderfully filling the hole. To do this, thread your finger between the two incisions that you just made ruthlessly: this piece of cloth will become threads. Take the needle and use it to separate the transverse white threads from the longitudinal blue on the upper and lower edge of the piece. After that, take tweezers and start to pull the blue threads out of the piece. This will not be difficult, because the weaving of the fabric has already been broken by scissors, you only need to "dissolve" this site to the end. When all the blue thread is pulled out, only the transverse white ones will remain, the same ones that are more fashionable than the world. And now you can take a pumice or pumice and lightly rub the "holey place", so you will get a little extra fringe that fringes all this beauty, and the effect of light wear.

And here's another option, how to make holes on jeans,that they looked like a womanishly coquettish. Take a piece of any lace and sew it from the wrong side under the cuts. To the front side of the pants were not visible seams, try to grasp the needle with only the inner threads, not piercing the fabric through and through. Sew on small stitches, and try to match the thread to the color of jeans.

You can use other ways of howmake holes on the jeans. For example, a blade can create on the pants so-called artistic incisions; using a normal nail file, jeans can be torn; A metal brush can "rastrepyvat" holes before getting fringe. But, of course, the best way to do this is with cotton pants, with synthetics or stretch fabrics you need to be more careful, otherwise it can crumble.

And you can also "update" old pants veryin the original way. He does not apply to any of those, how to make holes on jeans, but still may be interested. This refers to chasing. To make it on a denim fabric, you need to take any three-dimensional image, and embossing for this purpose is ideal. Next, you need to dunk your pants, then inside, under the place where you want to get a picture, put an image. After that, take the laundry soap and soap it well, then rub it with a very hard brush until the image shows up.