How to make beautiful ribbon bracelets with your own hands?

Of what only do not make jewelry: from beads, leather, threads, wire. Sometimes they use rather unexpected accessories, for example, nuts. You can also make bracelets from ribbons - with their own hands, this way you can weave very bright and original gizmos. It will take two narrow satin ribbons. They should be no less than one meter long, the same width and contrasting colors. For example, red and white, and yellow or orange will be successfully combined with black.

Homemade bracelets from ribbonsnovice craftsmen, because it's very easy. Before the beginning of weaving, the ends of the bands should be knotted together, leaving the tips at fifteen centimeters. They are useful for fastening.

After that, on each of the tapes do twoloops. Their size should not exceed 10-15 centimeters. Then put them on top of each other, bend the black one, as if to create a knot. As a result, she wraps the bottom ribbon and returns. In it, you must pass a yellow loop and tighten. After that, change the tapes. Now put a yellow loop in black. So, alternating colors, continue the weaving until the decoration turns out to be the desired length. Pay special attention to the first puff. It is the most difficult, because it requires the use of effort. Further actions will be easy. At the end of the work, when the bracelets from the ribbons are almost ready, you have to pass the tail (it should be of a different color) in the last loop and hold it to the end. After that, pull both strips in different directions. Get a bundle. So will the original square braided bracelet.

Make bracelets from ribbons with your own handsshould be neat. Do not tighten too tightly to form a clear and even pattern, and the strips lie the same. As a basis for weaving, use a flat surface. It is recommended in the beginning of work to fix the end of the loop on it with a nail, pins. So you will not lose the tape. To control the degree of tension of satin strips, it is enough to insert a strong harsh thread into the center of the future product.

There are many options, for example,You can make a round bracelet of ribbons or three-dimensional. It is made of four satin strips. It is made quite easily, too. After the bands are tied together, one of them, for example, white, needs to be bent from top to bottom to make a loop. On it to shift across another, red. The third strip, beige, is bent so that it overlaps the previous one. The fourth tape to pass into the loop, which was formed first, and tighten. Do it carefully. The result is a square. You can not allow the tapes to roll, this will affect the shape of the bracelet. That the volumetric ornament looked more effectively, it can be twisted around its axis in the process of creation. To do this, it is enough to slightly shift the weave aside, without stretching it in length. So weave to the required size.

In this way, not only bracelets from ribbons are obtained, one can make both decorations and various pleasant things for interior decoration with their own hands.