For a long time the paper attracted many people, not indifferentto needlework. Working with it develops logic, thinking, reveals in a man various skill skills. Particularly interesting are the articles on military subjects. All these pistols, helicopters are admired by many fans of this topic. Fans of this art are always looking for something new and unusual. Our article will be able to interest these people, as it will discuss how to make a grenade from home paper. It turns out that there are a lot of technologies for making such articles. In this case, you can use a lot of things that are dusting in the closet and do not find any use for yourself. How to make a grenade from paper? This article will tell you a few interesting ideas and help to build such a hand-made articles from ordinary materials.
So, how to make a grenade from paper, the schemewhich would be simple enough? To prepare the body of a pomegranate, prepare a cardboard base in the form of a cylinder. We proceed as follows. The height should be calculated so that it corresponds to the height of the firecracker. Then a figure is cut from the cardboard, which is folded into a cylinder. The edges should be overlapped by one centimeter. Then they must be glued together. Triangular projections are also glued together one to one. The first bottom should be additionally strengthened with a cardboard circle, set on the glue.
To prepare a charge and a fuse, matches are takenand are tied to the firecracker on scotch tape. In this case, the matches must touch each other's heads, and only one of them must touch the part of the firecracker that is to be ignited.
Now you can proceed to the preparation of the triggermechanism and checks. To do this, a strip is cut from the plastic bottle, the width of which should be approximately five millimeters. One end of this strip is held together by a stapler in the form of a loop. It will come in handy when you pull a check. Also, a strip of brown is cut from the matchbox and is glued to the second end of the previously prepared strip of plastic. The same end should be attached to the firecracker so that the cardboard strip from the matchbox tightly touches the first match.
At the last stage of the preparation of our grenade, wewe return to the ready-made bottom of it. In the center of the bottom it will be necessary to make a hole in the form of a rectangle for the withdrawal of the plastic loop. After this, glue is applied from the end of the firecracker near the check, the check is passed through a rectangular hole in the bottom of the grenade. The body is filled with peas, the second end of the firecracker is sealed. Then the grenade is closed with the second bottom with the help of glue. Here is such a simple technique shows how to make a grenade from paper without any special conditions. However, this method is not unique.
Tell you how to make a grenade from paperway. This takes longer than the previous technology. However, the result more visually resembles a real grenade. Items for manufacturing are also used a little. We will not need anything super complicated. So, how to make a grenade from this paper using this technology? To prepare our craft, you need to take an egg from expanded polystyrene, cut off its upper part. Then, on its basis, we draw cells, as on the original grenade. According to this drawing, it is necessary to pick open the egg and paint it. You need to choose a color that matches the color of this grenade. Then all the blasting parts are cut from the cardboard. All this is fastened, and a check is hung on top.
Here are some simple ways to answer the question abouthow to make a grenade at home from paper, and what materials are needed additionally. All this is easy to do, you just need to include imagination and have patience, and there are plenty of means to prepare the house. We hope that these methods of making grenades have interested you, and you will try to translate these ideas into reality. Successful needlework!
</ p>