How to disassemble a CPU cooler? The best cooler for the processor

Normal operation of any computer, and especiallydevice that is more than three years old can not be performed if the system unit is not cleaned of dust and is not smeared from time to time. But not all PC users consider this a necessary condition, which is fundamentally wrong. The rather rapid consumption of thermal paste is affected by the heating of internal elements and, as a result, the temperature rise in the system unit. To replace the lubricant, it does not take much effort or special skill. The main thing is elementary knowledge and extreme accuracy. Next, the maintenance process will be described and, in fact, how to disassemble the cooler.

Alarm signals

Any problems are disturbingsignals. So, before deconstructing the cooler, it is worthwhile to find out whether this is really necessary. If there are no obvious signs of failure, then this does not mean that nothing is worth doing. Sometimes lubricating components should be used for the prevention. But if there are good reasons for this, then all the more necessary to take decisive action.

The main sign that in the work of the systemblock there are difficulties, is the raised level of published noise. A noticeable buzz will cut the rumor, in time it will only become stronger. But it is better not to bring to such a state and change the lubricant in a timely manner, because the new cooler will cost much more.

Cleaning Beginning

With the question "how to disassemble a cooler" to copeeasily enough. The first thing to do is to disconnect the computer from the network and disconnect all available cords. The next step is to remove the cover of the case from the left side, while the unit needs to be neatly placed on the right side. Next, you must clean the inside of your computer of dust and foreign contaminants.

Since the work of the cooler is in the correctdistribution of air flows, then, respectively, from the environment, the item takes a lot of dust and small debris. Most of the unnecessary dust contamination settles on the radiator and other important components.

Cleaning can begin with the most common actions,for example using a conventional vacuum cleaner. But here is better to finish more carefully - wipe the parts with a cloth moistened with any alcohol solution. You can use both cologne and vodka. Any alcohol-containing substance is good in that it does not react with air, dries quickly and does not cause corrosion of the metal (which is typical for water). Depending on how thin and deep the cleaning was, the further work of the computer depends also.

Prevention of CPU fan

With how to disassemble a cooler, in more detail you canread more. To perform this action, you need to remove the processor fan, and then the radiator. They must also be disconnected from each other. Cleaning of these elements also consists of two stages - surface cleaning with a vacuum cleaner and more detailed, carried out with a match.

To ensure further trouble-free operation, it is necessary to touch both the surface of the radiator, and its fins, and the impeller of the fan, as well as the accompanying details.

Replacement of thermal paste

The best CPU cooler is that part,which is well lubricated. When parsing the computer, replace the special thermal paste is very important. To do this, first remove the remains of the old substance. They are washed off with alcohol solution. After that, you must wait for the surface to dry well. In the end, you need to apply a thin, neat layer of new grease.

In the event that there is no new thermal paste, and there is a need to replace it, you should try to distribute the traces of the old material evenly over all rubbing places.

one system

Many are interested not only in how to disassemblecooler laptop Acer, but also the reverse action. This is relevant for those who prefer to apply lubricant to a single system. In order to do this, you need to find a sticker on the cooler. By removing it, you can gently clean the spindle of the fan from the grease marks.

Where there was a sticker, you also needclean. It is necessary to wipe this place with alcohol solution and dry it. The next step is to apply a new paste. After that, you can return the sticker back (the original sticker can replace the adhesive tape). Its remains should not disrupt the work of the part, as they will create unnecessary noise. If you do this accurately, then the efficiency will be maximum. The main thing is to ensure tightness, lubrication due to the increase in temperature should not flow out.

If you lubricate this way, then the question of how to disassemble an undiluted cooler will not be a problem.

Power Supply Fan Prevention

During the cleaning process, the userthe question of how to disassemble the cooler of the power supply. First of all it is necessary to dismantle the component. It is desirable that all manipulations performed with the unit do not require disconnecting the cords from the consumers of the power supply. Then everything happens according to the standard scheme - at first the general cleaning with a vacuum cleaner, and then more thoroughly, with the help of an alcohol-containing substance.

To make a deep and thorough cleansing, you need to remove the block from the fan. It is necessary to touch all surfaces, fins of radiators and fan wings.

Cleaning the fan of the power supply is carried out byThe same scheme as the CPU cooler. It is necessary to separate the sticker from the surface, under it there will be an end cap. This element must also be removed. With the help of a regular match, you need to clean up dirt in the form of clots of old grease and dust from the shaft and washer of the fan.

Then also it is necessary to distribute the oil evenly and uniformly along the spindle of the cooler. To do this, the fan rotates - just a few revolutions around the axis.

After completion of all manipulations, the system needscollect: put the plug in place, glue the adhesive tape. In the process, it is desirable to clean and dry the ends of the fan. The ends of the tape are removed, and the power supply unit is mounted back.

If possible, it is better to keep native stickers, because they contain information about the cooler. These data are very useful when you need to replace it.

It is also important to secure the lid tightly. If it does not sit tightly, it will create a sound similar to a non-working fan.

Silent work of a computer is an indicator that everything was done in vain.

Selecting a lubricant

When cleaning the PC, the question arises as to howgrease the computer cooler. Experts advise choosing not too viscous mixtures as a lubricant. This is due to the fact that the latter lead to a decrease in the speed of revolutions. The best choice is engine oil. Alternatively, synthetic and mineral oils can be used. Just do not need to apply them at the same time.

Apply a few drops of oil with a match. A match is needed in order to take the minimum amount of substance.

For lubrication of the fan is suitable:

• WD-40 - anticorrosive mixture;
• oil hairdresser's tools;
• Silicone Grease;
• synthetic motor oil;
• mineral motor oil.

Preparation of grease

Than to grease the computer cooler? You can prepare the mixture at home. The composition should include graphite and oil. Graphite can be taken from a pencil, it is better to use synthetic oil.

Best Cooler

Thus, the best CPU cooler isthe one the user regularly looks after. The part must be cleaned and lubricated in a timely manner. These procedures will provide a reliable and comfortable operation of the fan of almost any model.

As for the specific characteristics of the bestcooler, as most parts are now manufactured with similar parameters, especially for fans. Of course, there are "gaming" models that provide good cooling, but their use is advisable only with a high load on the processor: demanding games, working with several massive programs simultaneously, complex processing of audio or video. Speaking of manufacturers, the products of such brands as Cooler Master, DeepCool (excellent choice - Deepcool Lucifer V2), Thermaltake (for example, Thermalright Macho Rev.A), Zalman (for example, Zalman CNPS12X model) are of high quality.