Printer Laserjet M1132 MFP: instruction, specs and reviews

HP LaserJet M1132 MFP Printer is a vivid examplereliable, high-quality and at the same time sufficient simple MFP (multifunction device) for home or office use. The developers said a rather impressive maximum load for this printer - about 8000 pages per month.

Guaranteed manufacturer's average efficiency forThis device - about 2000 sheets, and this is in contrast to inkjet analogues, which will master no more than one and a half thousand pages per month with the connection of additional CISS and other equipment.

Positioning

MFP HP LaserJet M1132 MFP on recommendationthe manufacturer should be positioned as office equipment, but in fact the printer is more suitable for household needs than for a working routine. The practicality of the device in the office environment is questioned due to the lack of some useful modules and functionality required for the entourage of a secretary or bookkeeping: duplex, fax, multi-page automatic document feeder, communication interfaces and a capacious tray.

To protect the printer as an "office worker", you cansay that he compensates for his shortcomings with high printing speed and quite an acceptable price in the region of 6,000 rubles. But if you need a serious "hard worker" with the support of the above-described functionality, you should pay attention to a more productive model from the series like M1212NF with the corresponding price (8000-10 000 rubles).

Quality control

The device is approved by all sorts of brandedtechnologies, confirming the reliability of the LaserJet M1132 MFP. The instruction is full of the marks of laboratories about the availability of new technologies, among which such useful things as HP Auto-Off and Auto-On allow automatically shutting down the printer at the time of inactivity and intuitively turn it on when getting a new task. This feature can save a lot on the power consumption of the device. These include Energy Star and Instant-on Copy standards that reduce power consumption during copying and waiting.

Numerous reviews about the model as "domestic", "and office users can confidently say that the manufacturer has not deceived its customers in terms of energy saving and the introduction of new and convenient technologies that make it much easier to handle the device.

In addition, the HP LaserJet M1132 MFP printer canboast full compatibility with all popular operating systems: "Windows", "Linux" and "Mac OS". The firmware of the device is assembled in such a way that the user does not need to insert a disk to install drivers and applications - the printer will automatically perform its "binding" to the workplace at the time of connection.

Design

Design LaserJet M1132 MFP can not be called catchyor stylish, it, rather, is moderately original and, like all the products of "Hewlett Packard", is easily recognizable. Designers did not equip the model in modern trends like oval corners or glossy surfaces, so it looks like an office device and a home printer in appearance.

Printer LaserJet M1132 MFP is made in a flatoption and is not much different from the box in which it is delivered. The device goes in one dark matte gamut, which is quite practical - the plastic will not collect dust, and the fingerprints on it will be barely noticeable.

If we talk about size, then the model is not suchmassive, like older brothers, especially considering that we are talking about a laser device. The width of the printer does not exceed 42 centimeters, and the depth and height - 26 cm.

Assembly

The build quality of the LaserJet M1132 MFP isproper level and does not cause any complaints. The model can accommodate up to 100 sheets of conventional offset paper in the receiver, and about 200 units into the input tray. The design density of the carrier, according to the manufacturer's instructions, varies between 60-163 g / m². Under the reception tray is conveniently located cartridge for the printer LaserJet M1132 MFP, it is always available and easily replaceable.

Many users in their reviews though complain about the clumsy and angular design of the model, but for the quality of assembly and "filling" unanimously put five points.

The device is equipped with a completely understandable panelcontrol with a variable angle of inclination. There is a digital LCD display, several buttons and LED indicators. When working with the MFP you can always see its current status and go to the settings for contrast or zoom.

Interface for connecting to a computer from a printeronly one - USB, although there are options for self-development / connection of an additional network unit for the LaserJet M1132 MFP (the instruction assumes only service intervention at the company's service points).

Technical capabilities

According to the manufacturer's specificationsmodel M1132 is designed for a maximum resolution when printing in 600x600 dpi. But the brand already introduces special support for its devices, allowing to expand the possibility of the device during printing reaching a maximum resolution of 1200x1200 dpi. This technology is implemented through the HP FastRes 1200 software and can be installed in any service center.

Choosing an office job LaserJet M1132 MFP,It is worth considering the technological features of the laser printer. All devices of this type begin to print only after a slight warm-up. Thanks to proprietary support of Auto-On and Auto-Off technologies, the time for preparatory warm-up was reduced to 8.5 seconds. According to the developers, the speed of printing is about 20 pages per minute, but it was not possible to print more than 17 pages on the stands.

Filling

The device is equipped with a contact matrixwith a proprietary flatbed scanner, where the maximum resolution for embedded optics does not exceed 1200 dpi. The backlighting of the sheets is carried out by LEDs, which again saves energy consumption both in idle mode and in working condition.

The device is equipped with a standard for these modelsprocessor with a clock speed of 400 MHz. Also there is a small amount of built-in RAM of 8 MB. Cartridges for the entire line are equipped with the same type - model CE285A with a resource of 1600 pages. Compared with inkjet analogs, this is a very impressive figure, especially since the LaserJet M1132 MFP printer (the instruction allows intervention) can be upgraded to more capacious printing.

In general, the printing system of the device can becall the standard for a printer of this class. The powerful advantages of the model are a low speed of heating and high speed of copying with printing. But behind the high speed follows and the well-known scourge of all laser devices - frequent replacement of the cartridge.

Testing

The LaserJet M1132 MFP is simultaneouslyIt is equipped with a scanner and a copier, although access from the control panel is only to the copier. Copies the device quite frisky, and one copy it took about 13 seconds of time.

Even though the high resolutionthe scanner does not differ, only 600x400 dpi (less than when printing), the copies obtained as a result of copies proved to be quite tolerable quality. Although some letters and numbers "floated" along the contour, the text itself remained more or less in contrast without extraneous noise or other unpleasant artifacts.

Before printing, the device can be set to twoThe quality mode is 600 and 1200 dots per inch. Despite the difference in dpi, you can even read the font of the first size with a resolution of 600 points. Knowingly laser technologies are called kings of document printing. It's impossible to distinguish the high resolution from the lower one by eye, therefore for a typical office work the size of 600 dpi is more than enough.

Print speed

In the FastRes 600 mode, a single-page A4 paper was printed for about three seconds, and at a higher resolution, 1200 dots, and a little longer - 4.5 seconds.

For warm-up before printing, the device has spentnine seconds, and along with the time on the output page was spent 12 seconds of time. With settings in the mode of 600 points for printing 10 sheets, the printer spent exactly 40 seconds of time, that is, in a minute, according to simple calculations, the machine produces 15 copies of the text.

If you used the preset withresolution of 1200 dpi, the number of copies was reduced by 5 copies. Well, since it is not visible or any significant difference between 600 and 1200 points, it makes sense to work only in a resolution of 600 dpi - the speed and the saving of the cartridge.

In general, we can say that the M1132 model showed excellent results both in terms of printing speed and the quality of the document as a whole, leaving behind quite a few similar competitors.

Summarizing

Before installing the LaserJet M1132 MFP, be sure to read the instructions in order to avoid unnecessary problems and unclear situations.

The above-described model is more than successfulpurchase from the category of monochrome multifunctional devices. Having excellent print quality coupled with high speed of warming up and imprinting, the device has compact (for a laser printer) dimensions and a memorable corporate design from Hewlett Packard.

M1132 is perfect for home use: copying, scanning and printing. But for office everyday life this model is of little use because of lack of automatic feeding and two-way sheet processing. If your secretariat or accounts department are not loaded with large volumes, then you can recommend this model for saving, but in other cases it's better to pay attention to more productive and multifunctional devices of the HP line.

Pluses:

• fast heating and printing;
• print quality at a high level;
• excellent assembly from a well-known brand;
• the design is non-mark and differs in ergonomics.

Disadvantages:

• high price of original cartridges;
• there are no necessary for the office needs of the automatic document feeder and duplex;
• limited connectivity (USB input only).

Otherwise the model LaserJet M1132 MFP will be an excellent assistant, justifying its choice as an economical attitude to the owner's finances, as well as the quality of printing documents.