How to connect to WiFi without knowing the password: step by step instructions

Today, almost every second person usesthe Internet. This can be either a home network or an unprotected or protected wireless network. Often users are interested in the quite natural question of how to connect to WiFi without knowing the password? Many can say with confidence that this is impossible, but the thing is that it's not so simple. In fact, nothing is impossible, so we'll tell you how to do it.

Some general information

As practice shows, not everysets a password on your internet. In this case, you do not need to invent anything, and you can freely use it, without worrying that it will be recognized and the connection will be secured. Note that, for example, in large companies almost never put a protection, it is clear why, it is not very convenient, and the time it takes to enter data. But we have a different situation: an evil neighbor put a password, and we want to go online. First of all, make sure the password is right. To do this, just enter any combination, if the connection is interrupted, then we need a sniffer. We'll just talk about this.

How to connect to WiFi without knowing the password

To do this, you need to download special software. As mentioned above, we will use a sniffer, a program whose main purpose is to catch information packets. Today, there is a whole bunch of similar utilities available on the Internet, for example, Shark. Deal with this software will not be difficult. When you make the first start, you will realize that you can intercept a lot of useful information. Here you can find the IP address of the data recipient and, in fact, the sender. Based on this, you can configure your computer for a successful connection. In principle, in the near future we will work with IP-addresses. But it's not as simple as it might seem at first glance. First, the wireless Internet, which we were about to hack, should work. Secondly, it will be good if it is actively used, due to the fact that at that time a huge amount of information packets is transmitted, and that's all we need.

WiFi-router: the password is not a problem

So, let's try to change the network addressour computer. This is done in order to make it "native" for the router. Here much depends on what operating system you use. Although the principle is the same. It is that the network address of the computer or laptop is exactly the same as the router. Nevertheless, the last figure should be left unchanged, because we are talking about the unique address of the network. You can not change the subnet mask and leave the same one. As an illustrative example, we give the following information. With the help of the sniffer you got the following address 192.168.5.2, in addition you have also a subnet mask of 255.255. 255.0. Your address you do exactly the same, but the last digit remains unchanged, and the mask is left the same, although it, as a rule, coincides. In principle, we have practically managed to connect to WiFi. Without a password, this can not be done, so it must be hacked.

Final stage of deprotection

So, we sorted out the addresses. As you might have noticed, there is nothing complicated here. We have very little to do, and then we can rejoice. First, you need to find a password cracker worthy of attention. Since it's not likely to connect to WiFi without knowing the password and hacking it. There are a lot of such programs. Most of them are not aimed specifically at breaking the protection of the wireless Internet, and passwords of accounts in games, social networks, etc. But we better use such software as Comm Viev for Wi-Fi. The utility is completely free and extremely easy to use. An intuitive interface will help you to figure it out. But the whole point is that we already have all the necessary data. This is the network address and the information packet of the router. Then the program will do everything for you. For a WiFi password, they come up with different combinations of letters and numbers, but the degree of protection depends on the encryption method chosen.

Conclusion

As already noted above, much depends on thethe degree of protection, that is, the chosen encryption option. There are three in total. If you are using something like WPA or WPA-2, then you are unlikely to get something, if only because you can not see the network, even if you know exactly what it is. In this case, you can not help dancing with a tambourine, you need the participation of a professional hacker, and such services are decent, so it makes sense to think about the appropriateness of such a lesson. If it's not about the intense devouring of traffic, then it's likely that it's easier to ask the owner for the password. Chances are that there will be no problems, especially if you need access to work or study, and not to download movies of 20 gigabytes a day. Well, that's all that can be said about how to connect to WiFi without knowing the password. There is nothing complicated, but sometimes it does not make sense, and modern routers are protected quite reliably, so they are very difficult to "open". But if you really need, you can try.