Rostelecom router: connection, configuration, instructions

"Rostelecom" at the conclusion of the contract for renderingservices gives out its equipment to its subscribers - a wi-fi-router "Rostelecom", which is considered one of the most popular and popular among users of wireless technologies. It is quite easy to configure such a device. Any user can independently set up a connection to the Internet via a modem, perform a step-by-step configuration of the router and check it.

Why do you need a separate instruction to Rostelecom routers?

After the conclusion of the contract with the service providerthe user is faced with certain nuances. The receiving port of the router of this company is not the same as in the usual router models, which are widely represented on the market.

Rostelecom routers are equipped with a receptionconnector ADSL, while other models of routers installed RJ-45. In connection with such features, the configuration of the router "Rostelecom" is different, not as in other modems.

Features of routers "Rostelecom"

On the case of routers there is a sticker,containing detailed information about the device: model name, available modes of operation, subscriber login, passwords of WiFi routers of Rostelecom, Internet access code and MAC. The routers are loaded with special versions of the firmware, thanks to which the tincture is carried out quickly and without any problems, and the input is selected with a separate code and name. For this reason, before setting up the modem, it is desirable for the user to record all the data shown on the equipment case.

Equipment

The router of Rostelecom is supplied to the company's subscribers in a certain bundle:

1. Warranty for the equipment.
2. Power Supply.
3. CD with recorded software.
4. The instruction manual, which details how to connect the router of Rostelecom.
5. Twisted pair, prepared in advance for operation.

Connecting the Router

Regardless of the specific device modelsetting the router "Rostelecom" should be done with the power supply off. Simply put, the equipment must be connected only after all the gadgets - modem, computer, netbook, set-top boxes and televisions - are disconnected from the power supply.

The router is connected as follows:

1. The input port of the ADSL modem inserts a receiving cable, or an Internet cable.
2. A power supply is connected to the mains, the plug of which is connected to the corresponding socket of the router.
3. Through the LAN ports, the modem is connected to the computer via a wire.

Verify the connection is correct

Verification of whether the router of Rostelecom is properly connected is performed as follows:

1. On the case of the modem is a switch with the symbol Power, which must be switched to the "On".
2. The load of the router lasts about one minute, after which it starts to work.
3. A personal computer is loading.
4. In the open browser window enter rt in the address bar, then press Enter.
5. A menu appears in which the login and code are entered. The required parameters are indicated in the information sheet located on the case of the router.
6. The router of Rostelecom is configured through the menu opened after manipulations.

How to configure the router of Rostelecom?

The router is configured throughthe opened window both manually, and by means of a special "Setup Wizard". Manually configure the router Rostelecom advise only users who have experience with such devices.

The router is configured as follows:

1. The "Setup Wizard" appears in the menu.
2. Indicate the place of residence of the user - area and city.
3. The type of services provided by Rostelecom is indicated: "Internet", "Telephone and Internet", "Telephone", "Internet and television". The necessary information can be found in the contract concluded with the company.
4. If the user has a dynamic IP, the item below is ignored.
5. The password and login given by the company are indicated, in the following paragraphs the ports to which television and telephone are connected are marked.
6. Specify the password and login of the Wi-Fi network.
7. Confirm the correctness of the entered password.
8. All the settings are saved.
9. The browser is shutting down and the router is restarting.

After the configuration is completed correctly, an internet connection should appear.

Router SAGEMCOM F @ ST 2804

One of the most popular and commonrouters used by Rostelecom. It is issued to almost all subscribers according to the terms of the contract. The router "Rostelecom 2804" is characterized by stable operation, good signal, pleasant design, wide functionality and good characteristics. The advantage of the router is the presence of USB-ports, with which you can create a backup channel, including the mode of 3G-modem.

Router Features

• IPTV.
• Compatibility with other equipment.
• Powerful processor.
• Ability to support various IP-services.
• Implementing the MAC address filtering.
• The telephone line is kept free after the router is connected to it.
• Full technical support and after-sales service from Rostelecom.
• Stability of the body to shock and damage.
• High speed of connection - 300 Mbit / s;
• Automatic switching of communication channels in case of troubleshooting.

Client TR-069 allows you to remotely monitor the router. The router from "Rostelecom" supports all modern IP-services and technologies.

Router D-Link

D-Link routers are widely usedprovider of Rostelecom. The D-Link DIR 300 router is one of the most popular. Due to its hardware features it is ideally suited for the provider's network, ensuring stable operation of the Internet without failures and errors on tariffs, the speed of which does not exceed 100 Mbit / s. Using a router, you can install a Wi-Fi network, it supports IPTV, and its configuration can be made by the user manually.

Model D-Link DIR 300 is most often issued to thosesubscribers of the provider "Rostelecom", who signed a contract for Internet provisioning over UTP-cable, that is, with FTTx technology. This cable is pulled into the subscriber's apartment from the flap located in the entrance of the house. For subscribers who are connected to the Internet via a telephone line, the router of this model will not work.

How to connect a D-Link DIR 300 router

On the rear panel of the router there are network interfaces in the number of five pieces - one WAN and four LAN, a RESET button and a power connector.

• Connected from the entrance cable from the provider's shield is connected to the INTERNET connector, or WAN.
• Using a cable, the computer can be connected to any of the four available LAN connectors. All four ports are equal before the settings, but most often use LAN 1.
• A set-top box is connected to LAN 4 port. If there are several TV receivers, they are connected to the LAN 3, LAN 4 connectors, respectively.

Initially, the router is configured throughPersonal computer by connecting via the cable that comes with the device. If this is not possible, connect to the router via a Wi-Fi network on the tablet.

Quick setup of the router

In the latest versions of the firmware for the routerD-Link DIR 300 provides for quick setup, thanks to which the connection can be installed in three steps thanks to the special program Click "n" Connect. To connect to the Rostelecom network, simply specify the PPPoF protocol.

In the opened tab, the password and the access login specified in the contract are entered in the appropriate fields. The name of the connection can be kept unchanged.

After saving all the settings of the routerautomatically connects to the provider's servers, and then reports the presence (or absence) of a successful connection. Similarly, on the D-Link router, you can configure the physical port for television connected via an IPTV receiver.

TP-Link router for Rostelecom

When making an agreement with the providerInternet services "Rostelecom" subscribers are offered routers of TP-Link brand. Virtually all models of this manufacturer are ideal for distributing the Internet signal to any gadgets.

On most models of routers, software is installed to protect the personal computer and the connection itself from attacks of intruders and extra "garbage".

Automatic configuration of the router

1. Included with the router is a cable with connectors for LAN-ports. Usually it is yellow.
2. Through this cable, the router connects to a personal computer or laptop.
3. In the WAN connector on the back of the device, a cable is connected by the provider to the apartment.
4. The router itself is configured. On the device box is usually indicated the address of the web-interface: in most cases it is standard - 192.168.0.1, but you can use the manual input of the combination tplinklogin.net. You can use any browser to enter the address.
5. On the authorization page, the appropriate fields are admin. If access is denied, the input data can be viewed on the router's packaging.
6. The menu contains the user data: location, provider name and other information.
7. To enter the subscriber's personal area, the data listed in the agreement with Rostelecom is indicated in the next window.

Automatic configuration of the TP-Link router allows you to quickly create an Internet connection without resorting to a lengthy manual configuration.