Settings "Micro". MikroTik: quick setup of the access point

Now more and more companies want to make oneinformation network, so this issue is relevant. In order to combine signals, it is necessary to work correctly with the parameters of the equipment. This article will discuss how to configure router MikroTik.

Total information

In general, models from this manufacturer are consideredsuitable for work both at home and in the office. You can even create a large grid for working with a large number of office employees. The router at the expense of its performance will allow to work both in large rooms and in small ones.

The device and its protocols can safelyfunction on different operating systems. This router is considered one of the most famous on the market of the Russian Federation. Setting "Micro" from scratch is simple enough.

Features

Sometimes there may be network problems whenthe client is behind NAT. In this case, when working with the L2TP protocol, problems such as packet blocking can occur. To solve this problem, follow the instructions in the operating instructions. This protocol has its drawbacks. For example, when working with it, security and performance levels are greatly reduced. So, you have to use IPSec technology. It allows you to increase the level of security. Because of this, the performance drops even more. In general, these technologies work fine, other options are well implemented, so the loss of performance can be called a security payment.

Server

In order to configure the serverrouter "Microtics", you need to make an IP static type. This nuance must be observed in any case, since the address should not change. If it is dynamic, then all users will have to use the DNS name, which will cause too many unnecessary actions. In order to create a profile, you need to go to the PPP section. There the user will see the official menu, which is called "Profiles". After that it is necessary to form the desired profile, which will be applied to various adventures. Moreover, you should also apply encryption and put automatic data compression. Apply the first nuance to the technology that will be selected by default. I must say that setting up a server is a rather complicated process, so you need to monitor it and not be distracted. Here is a router "Microtics" in operation.

Setting up WiFi

Once the profiles have been created, you need toconfigure the Wi-Fi module. To do this, you need a Winbox program. In it, you need to start and select the wireless connection option. Setting "Micro", if it concerns an access point, is as simple as possible. After that, you will need to enter all the correct values, go into the VLAN1 properties, select there work with wireless access points. In order for all settings to be correctly specified, you must select the HTC option. You may need to adjust a number of data. You need to ask them from a specialist (provider). If you know that you do not need to specify any additional data, you can go to the "Security" menu. Here you need to go to the Default section, then configure the encryption scheme. It is desirable, in addition, to install encryption. Thanks to him will be able to set a password on his access point. Configuring the router in this regard is pretty easy, security is much easier to maintain than on other wireless devices. It should also be understood that encryption is not the only thing that should protect the access point, so you need to come up with a complicated password.

Enhancing Security

Before improving its safety,It is necessary to work with WAN. In fact, all you need to do in order to protect your access point is to enter the correct IP address from the provider in the "Address" tab. Setting up the Microtick router is as easy as possible when it comes to setting up a regular network. Moreover, you can set the gateway in the settings. You do not need to select it, because it should be the default. After this, the full operation of the Wi-Fi network should begin. After that, no additional settings for the health of the Internet do not need to. If desired, you can set an automatic time display in the interface. To do this, you will need to register the server address from which the route will request time, and also set the time zone.

Configuring Network Interfaces

A fairly common problem isConfiguring network interfaces on some routers from this manufacturer. Let us consider one of the solutions to this problem. Before you start working with the router, you must reset all factory settings. That is, you need to go to the "Control Panel", select this device and reboot, dropping all options. If necessary, you should update the firmware. In order for the router to work correctly and provide a stable access point, it is necessary to properly configure the network interfaces. If desired, you can use an algorithm that allows the addresses in the router to be created automatically. That's why this router is considered too easy to use. To do this, go to the IP section, after selecting the DHCP function, set the settings. They should specify that NPT servers will be automatically exposed.

If you connect to the Internet throughthe PPPoE interface, then you must select the PPP menu. After that, the "Micro" setting is activated, that is, its client. It selects options that fully support the operation of network equipment. Some network administrators prefer to manually specify IP addresses. That's why, if the cooperation is with such a provider, then you need to go to the IP item and after the option "Addressing" select the necessary settings. Often, you have to choose the port to which the cable from the provider is connected. It is necessary to pay attention, that it is necessary to specify and a mask of a subnet. Accordingly, it is necessary to use the documents from the provider and make sure that all data is correct. In the event that the IP address is specified manually, you must set all the default route parameters. It is for this to select the IP item, after activating the desired route. Correct work router MikroTik will be provided by a Wi-Fi bridge.

</ p>

Rating: