HDX-motor: reviews

HDX is notable for the fact that itengaged in the production of electric, as well as fuel-powered boat engines. If we consider the first option, it should be noted that the power of the device fluctuates around 4 kW. Due to this, the central shaft in the model is capable of reaching about 5 thousand revolutions per minute. Most boat engines work extremely quietly.

This is due to the fact that the protective covers for themare installed above the rotor. If to speak about fuel updatings, on the average the expense of gasoline makes 1.3 liters for an hour of operation. At the price of a suitable option, the user is always able to pick up himself. If you consider a good fuel boat engine, then it will cost about 30 thousand rubles.

Consumer Reviews for the HDX T26

This single-cylinder outboard motor HDX (5 hp.) has a small capacity. However, it can last for a long time. Also note the high quality of the starter. It starts, as a rule, from the first time and breaks rather seldom. Maximum squeeze this boat engine is capable of 4300 rpm. As a result, it can be characterized as simple and reliable. The submitted motor HDX (5 hp) for today the buyer about 21 thousand rbl.

What is interesting about the HDX T2 motor?

This outboard motor HDX T 2 BMS in our timeis in great demand. However, it should be borne in mind that the engine in this case is installed two-stroke. There are three pistons in the construction, and they are arranged horizontally. If you believe the reviews of consumers, then the starter at this boat engine works the first time. It is installed in the presented design of a manual type.

Deadwood is automatic. In service, this model is quite simple. According to the owners, the lid of the carburetor is removed simply. The oil consumption is insignificant. Special attention is paid to this boat engine deserves a cooling system, which is installed water type. Clean it for normal use at least twice a month. This is done quite simply, but time consumes a lot. It is worth this HDX 2 motor about 27 thousand rubles.

What do they say about the HDX device T30?

Data Boat HDX-motor from other modelsdiffers in that the deadwood is set rather large. Due to this, the central stem is capable of withstanding heavy loads. If you believe the reviews of consumers, then the carburetor in the presented model breaks rarely. However, there are minuses in this instance. First of all, consumers note a large consumption of oil. In this case, the fuel system is located near the pallet. In this case, the valves are used rather thin. In some cases, the pushers are replaced after some time. If we talk about the parameters, then the power of this boat motor is at 4 kW.

Due to this, the central shaft in the deadwood forminute has the opportunity to make no more than 4 thousand turns. The crankshaft in this case is used rather strong. It is installed in the construction under the carburetor. If necessary, you can unplug it from the connector without problems. In the end, we can say that this model is very interesting and for sure many will like. It is worth about today about 32 thousand rubles.

Features of the modification HDX T36

These motors HDX reviews are good, and manybuyers prefer them because of the fact that the flywheel in the design is used crank type. In turn, the stator is installed manually. The limiting power of this boat motor is 4 kW. If you believe the reviews of consumers, the consumption of gasoline does not exceed 1.2 liters per hour of operation.

In service this model is very simple, butthe rocker sometimes disconnects from the deadwood is quite difficult. Also note that the pump must be lubricated with oil at least three times per month. Time it ultimately takes a lot. If we talk about the parameters, then the engine's working volume is equal to 75 cubic meters. see Total pistons in this case is set to three. In the market for this boat motor sellers are asking about 30 thousand rubles.

Parameters of model HDX T35

This boat HDX-motor is capable ofboasting a powerful engine. In this case, there are two cylinders in it. The thermostat for the submitted specimen is installed. The fuel pump can withstand a maximum pressure of 4 bar. A carburetor deserves special attention in the device. It is installed above the pusher and in service it is extremely simple. In this case, the user can remove the lid of the cooling system independently. However, to disconnect the deadwood, you will need help. It is worth to present the boat HDX-motor in our time about 25 600 rubles.

What is interesting about the HDX T4 device?

To date, the presented boat motorHDX (4 hp) is in demand due to its economical engine. It is classified as push-pull, and a maximum of a minute is capable of issuing about 4,500 revolutions. The clamp in this specimen has a thickness of exactly 4 mm. Thus, the load on the tiller can be given a large. Valves in the system are used rather simple, and do not need frequent lubrication. Among the shortcomings can be noted only a fairly short stock. In this regard, detach the deadwood is very difficult. It is worth the presented motor in the store about 29 600 rubles.

A new copy of the HDX T58

This outboard motor from other modelsdiffers in that he has a special fixator over the deadwood. Due to this, the user can change the position of the central rod. Thus, with the installation of the boat motor problems should arise. The pushers are standard. In turn, the clamp is set to a thickness of exactly 5.5 mm. The angle of attack for this configuration is available. Also, this boat engine is able to boast a rather long tiller. In this regard, device management can be called comfortable. The connector of the sample used is mechanical. In this case, it is located above the pallet. In the market for this motor, about 32 000 rubles are requested.

Modification HDX T5

The consumption of gasoline in the presented boat motordoes not exceed 1.3 liters per hour of operation. The limiting power of the engine is at the level of 3 kW. The total number of pistons in this case is three, and they are arranged horizontally. The carburettor in the presented sample is above the pallet and is connected to the fuel system.

If you believe the reviews of consumers, the oilthe specified instance consumes a little. However, the fences have to be cleaned often, and this takes a lot of time. There are latches in the indicated boat motor. They are located over the deadwood and in case you need to remove them you can. The stem in this case is set to a length of 124 mm. The pallet itself has a thickness of exactly 4 mm. Due to this load, it can withstand considerable. It is worth a present copy of about 34 thousand rubles.

Consumer Reviews of HDX T98

Most of all this boat motor HDX 9. 8 is appreciated for its four-stroke engine. The central shaft can make more than 4600 revolutions per minute. The outlet valve in the system has a maximum pressure of 5 bar. There are six pushers in the presented configuration. The distributing shaft of this outboard motor is fixed securely.

If you believe the reviews of consumers, then deadwoodcan be detached by yourself. The motor is attached to the boat using a clamp. To adjust its angle of inclination, the user has the opportunity. According to the owners, the gearbox is quite high quality. Forward manufacturer provides four speeds, and back - standard one. It is worth a modification of about 24,800 rubles.

Advantages of the HDX T15

The engine of this outboard motor is availablethree-act. Due to this, the central shaft makes about 4600 revolutions per minute. The outlet valve in this case can withstand a pressure of not more than 4 bar. The fuel consumption per hour of operation of the device does not exceed 1.3 liters. Of the disadvantages, it should be noted a fairly thin clamp.

In some cases, it is deformed due toheavy loads. Given this, the motor is more suitable to install on a rubber gasket. It is also necessary to know before buying that this model is quite difficult to maintain. It is almost impossible to remove the carburettor lid independently. Deadwood also disconnects with great difficulty.

Attachments for the sample are usedrather rigid. However, they still have advantages. First of all it concerns the waterproofness of the device. At the same time, the rod can not be corroded by applying a special additional coating on it. The market for the submitted HDX-motor is asked for approximately 29,400 rubles.

What is the difference between HDX T18?

Screws of the presented boat motorinstalled quite strong. In this case, the gears are located directly near the central shaft. The load they are able to withstand the large due to the hard clamps. The anode of this boat motor is located on the back side. Fastening at the reducer by the manufacturer is provided reliable. If we talk about shortcomings, many buyers complain that the position of the central rod is not possible to change. In the rest of claims for this model from the owners did not arrive. It is worth this modification to date about 29,400 rubles.

Features of HDX T99

Installed in the presented boat motorengine with a total power of 4 kW. It is classified as a three-stroke and the limiting frequency has a level of 4 Hz. The propeller in this configuration is attached to the skeg. The back gear of this model is provided by the manufacturer rather voluminous. Also it should be noted that a special water pump is installed in this boat motor. Due to this leakage to it is not terrible. The central shaft of this specimen can be adjusted. The maximum he can make over 3,500 revolutions per minute. If you believe the reviews of consumers, then in use this boat motor is very comfortable.

The output valve of the represented specimenmaximum pressure can withstand about 5 bar. Reducers in the boat motor break quite rare. Of the shortcomings can be noted only the rapid wear of the pushers. In this regard, it is desirable to periodically inspect them. If you believe the responses of the owner, then this action does not take much time. This model will run around the store in about 32,100 rubles.