Nodes for leashes. How to tie a fishing line to the leash on a spinning rod?

How to tie a fishing line to the leash on a spinning rod,know any angler. This is one of the most important factors for obtaining a successful catch. This is due to the fact that, when immersed in water, the fishing line loses about a fifth of its strength. And if the bundle node proves to be unsuccessful, the moment of breakage of the mechanism increases by another quarter. Let's consider features of this site and ways of its creation. There are many such methods: some of them are elementary, while others require a certain skill.

Features

How to tie a fishing line to a leash on the spinningcorrectly? It turns out that the best option is a leash that is attached to the line in such a way as to provide a reliable bite. This is just as important as equipping the bait, reel, rod.

The bottom line is that regardless of the strength of the rod,the quality of the bait and the excellent coil, poorly selected leash with an incorrectly tied knot leads to a break in the connection of the main line. This suggests that you can forget about any catch in such a situation. The only feature - certain nodes can be knit directly in the "field conditions".

It should be noted that the hooks to the leashes tiemuch more difficult. The time spent may cost a precious catch or miss the appearance of biting. The formality associated with how to tie a leash to the main line for spinning is an important thing, if not paramount, when organizing a decent fishing.

Mounting Options

There are many ways to fixthe considered devices, which will reliably fix the tackle, avoiding its breakage. There are simple and complex versions, but they are all quite effective. The main thing is to develop practical skills in one or another method.

How to tie a fishing line to the leash on spinning (basic methods):

• A simple and often used method is "loop into a loop". The simplicity of the design does not indicate its ultimate reliability.
• The dressing is performed in a few simple steps.
• First, a pair of ordinary loops from the main and additional lines with elongated dimensions are knit.
• Then the ends of the line with the loop are folded in half, after which they turn around 2-3 times around their axis.
• Initially, the loop from the line is passed through the ring, which is formed at the beginning of the process. After that, the system simply drags on.
• The leashes of the leash and the lines are fixed to each other, the fastening is ready.

How to tie a fishing line to a leash on the spinning: an improved way

Another famous fishing knot is usedmodernized type. It is knitted according to the loop-to-loop method, simply and quickly. It can be organized directly on the spot, without special skills and adaptations. This node is assigned to the universal type.

The stages of its creation are in the following stages:

• Main line and leash are applied to each other.
• The leash is wrapped around a part of the line, after which its end is pulled upward.
• The same edge is passed into the resulting loop without tightening.
• The remainder of the leash is wound around the loop once more.
• The knot is finally tightened.
• With the edge of the main forest, a similar operation is carried out.

"Nail"

You can attach the leash to the main spinning rod by another method called "Nail". It is not as simple as the options discussed, but it is distinguished by its high strength and reliability.

Stages of work:

• On the main line is a locking node.
• The main line and the leash are placed parallel to each other.
• The line of the leash is passed under the basic analog.
• One turn is made around the main forest.
• In the resulting loop, an oblong strong object such as a nail or handle is passed through.
• Around this device a few more skeins are made.
• The edge of the leash is pulled through the object, after which the knot is tightened. This manipulation requires care and accuracy, so as not to appear confused and disheveled areas.
• The remainders of the leash are simply cropped.

"Eight"

How to tie a leash to the main line onSpinning with this method, we consider further. This method is simple and simple. At the same time, the design has proved itself to be a reliable and quite strong knot. Stages of creation:

• Leash and main line are applied in parallel.
• A loop is made in the form of a figure eight (Flemish analog).
• The knot is tightened tightly.

Swivels

Next, we will study the next method, how to tieleash to the spinning line? In fishermen, it is called an "improved clinch." This system is strong, its strength reaches 95 percent. Such a design withstands easily with a weight of 10 kilograms or more. In this case, the main thing is to observe identical parameters of the main line and the leash.

Manufacturing process:

• The liberated edge of the forest extends through the swivel swivel.
• The same end is wrapped around the forest several times (up to five turns). The knot is not tightened.
• Then the end is passed through the hole that formed in the vicinity of the swivel ring.
• The pre-wetted prepared assembly is tightened tightly.

It is worth noting that such a design is not recommended when operating not ordinary, but a braided line.

Carbine

How best to tie the leash to the spinning line? There is no unequivocal answer to this question, however many fishermen use the system with a swivel and carbine. A knot with a swivel is made as follows:

• The swivel is pivoted.
• The parts of the lead are folded in half.
• The rest is also doubled.
• Fixation of the line is made in 2-3 cm from the bend mechanically (manually).
• Performed at least a couple of turns around the main line.
• The double edge of the forest is cut into the resulting loop.
• The nodal part is wetted and tightened.
• All residues in the region of 0.5 centimeter are cut off.

It should be noted that the resulting node refers to a fixed-type construction.

Integrated fastening

How to properly tie a leash to the main line with spinning with a carbine and swivel, consider the following:

• On the edge of the main line is attached a sinker.
• The leash is fixed to 200-300 millimeters above the weights. Here it is necessary to note one nuance: the branch leash must be strictly perpendicular to the main line.
• If the leash and the forest are connected directly,Consider the fact that the chance of entanglement of gear increases. Solving this problem will help the simultaneous use of not only a swivel, but also a carbine.
• With such a system, a swivel-carabiner system is attached to the main line, and then a leash.

Fastening multiple leashes

How to tie a leash to the main line onSpinning (photo above) when using multiple elements. To do this, you need to attach the parts correctly (no more than three pieces are used). Proper placement will not confuse the leashes among themselves and not tear them away from the main line. In this case, the "snake" node is used.

It is created in the following way:

• The main part of the line is parallel to the leash analog.
• Several turns are carried out by a leash around the main line.
• Similar manipulations are carried out with the opposite end of the main forest.
• The obtained segments are traversed through a loop, which was formed as a result of creation.
• The knot is carefully tightened.

As a result, one fixedleash and a pair of freely protruding ends. If you lengthen them, they really add extra leashes. To strengthen the design, you can use swivels and carbines, and already attach leashes to them.

The overall configuration largely depends on theneeds of gear and fancy. When creating a design, the main thing is not to bend the stick. Do not make such a device that will scare away the fish. If there is no special need for additional leashes, it is better to simply cut the protruding ends.

Recommendations

Below are some tips on how to properly tie a leash to a fishing line on spinning:

• It is quite reliable method of "loop in the loop."
• To prevent entanglement of the main line, it is necessary to operate the carabiner devices and swivels.
• Carabiners and swivels are preferably tied with a fixed structure.
• For binding A leash with a fishing line can be used by a simple way "loop into a loop".
• To the main line you should not tie more than three leashes.
• For complex use it is better to use a "snake" knot.
• For this configuration, you will need to leave long edges of the leashes, which will later securely fix additional elements.
• Any formation of a node has a specific strength parameter.
• Anyone, even a novice angler, can master various techniques of weaving the knots in question.
• A properly formed leash plays an important role in the final success. A weak tackle can easily go under the water along with the fish.
• It is worth noting that each type of node has its strength and reliability, and is also subject to rupture under certain circumstances.

Finally

As can be seen from the considered article, special problemswith the fastening of the leash to the main line does not arise. Thus it is necessary to be reserved for patience and to be adjusted on performance of works which are not especially complex, but without skill with them to consult it is problematic. The operation may not work out the first time - do not despair, try again, and everything is necessarily implemented. Thin and small knots are not as easy to do as it seems at first sight. Remember the famous proverb that the gods did not burn pots. Everything is known in comparison, and experience comes with time. A few training sessions will make it possible to make an excellent fishing tackle. At the same time, you will understand where to look for the cause of the malfunction, in case the device leaves the working state.