Replacement of the phone charging connector: features, typical cases

When the phone stopped charging,The problem is with the power connector. This is one of the common reasons. At first it is important to make sure that the breakdown is really only in it. How to replace the charging connector, will help to understand the advice of experts.

How can I find out the charging problem?

There are several ways to check,Do you need a replacement charging connector for iPhone, Samsung and other models. First, it is necessary to reproduce the events that preceded the fact that the device stopped charging. If the smartphone falls or the power cord has been pulled out sharply, dust or dirt has got into the power plug, then all this could lead to a breakdown of the power connector.

It is necessary to visually inspect the phone. Its reaction after connecting the device to the network may reveal the need to replace the charging connector. If there is no reaction to this action, then we can talk about the failure of the connector.

The main causes of failure

Replacement charging connector iPhone 5S, Nokia, Samsung and other types of phones may be required in several cases. The most common faults are:

Mechanical damage:

• The plug is inserted incorrectly, and the contacts are damaged.
• The power cable will be pulled out of the phone.
• A foreign object was inserted.
• Falling or bumping against a hard surface.

Pollution. Dust can get inside the devices. Also, it can be foreign parts that interfere with charging to work normally.

There is moisture or liquid. A filled connector is often faulty. This causes the device to break the phone.

Marriage in production. The ways of the connector were not lost. After a while, a malfunction occurs.

Often you have to deal with the already brokendevice for charging. Use such a device or experiment with it is incredibly dangerous - you can break down the technique. It is important to remember that replacing the power connector on the phone includes a certain list of actions, depending on the type of phone. For example, in the devices manufactured today, everything is incredibly small. The location of the details is dense. This somewhat complicates the repair.

How to change the connector on the phone?

When the unit does not keep charging, a malfunctionit is often determined in the power connector. This type of equipment has very small parts. They fit tightly to each other. Therefore it is important to be cautious in the process of repair. The master must have at least a minimum experience in this matter. Otherwise, you can not only not repair the phone, but also to break it completely. Replacement of the charging connector Samsung, Asus, iPhone and other brands is made according to a special scheme.

At the very beginning it is necessary to disassemble the smartphone,so you can remove the system board soldered to the USB connector. Among technologists and professional repairers, this charging socket is called micro-USB. It belongs to the most common power connectors.

There are also non-standard versions of devices. For example, these are the phones released in China. Many Asian manufacturers have recognized that it is necessary to standardize equipment. They try to produce only phones with the connector presented. However, when repairing such types of smartphones there are difficulties. Although the nest of all phones can be the same, the mounting to the motherboard is sometimes different.

If the phone is completely disassembled, the master inspects the damage and determines the actions required during the repair process.

Simple breakage

Replacing the charging connector for iPhone 5 or other popular brands of smartphones has a number of nuances. The power connector may not be damaged, but its contacts have moved away from the system board.

This often happens when exposed tomechanical force on the apparatus. Perhaps, sharply pulled the cord at the time of its disconnection from the phone. In this case, you do not need to change the entire connector. Repair will cost much less. Contacts can be soldered independently, having the appropriate equipment and some experience of similar work.

Complicated breakdowns

Replacing the charging connector Samsung, Lenovo andother brands of phones can be produced by more sophisticated technology. This is required if the charging socket is noticeably damaged. In this case, it must be changed.

Even more difficult if the nest is damaged, butYou can replace it only in combination with other parts. Today's apparatuses become even more subtle, miniaturized, and electronic components in them all less. For example, the lower board, to which the power connector is soldered, is very thin in certain models. It can not withstand heating and is deformed. Then there is only one solution - to replace the connector only with this board. This increases the cost of repair. There are often cases with new phone models where the power connector is built into the cable. Therefore, there is a need to change it complete with a cable.

Certain phone manufacturers have createdA new design, in which for dismantling, first you need to solder the screen. Therefore, without seeking help from a specialist of the service center, you will not manage. In order to replace the charging connector, it will be necessary to heat up and carefully remove the display module of the device. In this case, there is a high probability of harming the screen. The price of replacing the power socket is increasing.

If the presented work is performed by a layman, he can simply break down complex equipment. It is better not to take risks, but go to a proven specialist.

How to charge your phone when it's urgent

When you need to urgently call and the phone's connector is broken, do not despair. Before replacing the charging connector, you can charge the phone with the help of improvised tools.

Plates need to be buried in the ground,having wound them with a copper wire. Salt water pours on all this. This is the charger. When there is no iron at hand, it can be obtained from improvised materials. For example, metal pins are inserted into lemons or apples. Wires are wound on them.

Having become acquainted with the peculiarities of carrying out the replacement of the charging connector, it is possible to make the correct decision on how to solve the malfunction.