Navigator prestige 5056. Instructions for use. Installation and use

Prestigio Geovision 5056 - Automobilenavigator, which is perfect for those users who are looking for an inexpensive but at the same time functional and convenient device. In this article we will tell you about the main functions and possibilities, and also introduce the instruction on the use of the Prestige 5056 navigator.

Preparing the device for work

Before using the device for the first time,read the installation and operating manual. From it you will learn how to properly fix the device in the car, how to install a memory expansion card, set up the navigator interface and set the route of movement.

Before the first start of the device it is necessaryfully charge from the mains. Approximate time of full charging of the navigator of this model is about two hours. Nevertheless, the first process of charging is desirable to extend to eight hours - this will favorably affect the capacity and "health" of the battery. The indicator will indicate the end of charging, changing its color from blue to amber.

For correct operation of the device,The Prestige 5056 recommends that you install a memory expansion card before it is powered on for the first time. In this case, all updates to maps of settlements, as well as multimedia files will be stored on this medium. The next step is to determine the location of the navigator in the vehicle interior. Best for this purpose, a place near the windshield. In this case, the signal quality from the GPS satellites will be better.

Install the device

Following the instructions for using the NavigatorPrestige 5056, install the device in the cabin. To mount the navigator on the front panel of the car in front of the windshield in the kit there are two elements. This, in fact, the mount itself and a special bracket. They need to be connected, and using a special Velcro to attach to the surface of the dashboard or to the windshield itself. Then, using the lever, fix the fastener in the selected position. After that you can place the navigator on the mounting station. The device is now installed.

The next step, according to the instructions forthe use of the Prestige 5056 navigator (device photo see below), will be the definition of the motion path. At first glance, setting the route may seem like a difficult task. Especially it concerns users who first deal with a car navigator. In fact, this model has an intuitive graphical interface, which you quickly get used to. Even an inexperienced user, using the instructions for using the Prestige 5056 navigator, will be able to set the required route. Below we will tell you how to do it in several ways at once.

Routing

If the navigator is running, then after some timeYour location will be determined using GPS satellites. This point will be the beginning of the route. All you need to do is to set the destination on the map by touching the device screen. In addition, you can specify the location where you want to route using the exact address. To do this, you need to enter the menu, and then select the "Find" section. Then specify the desired country, city, street and specify the required address.

Another way to route the route is manual search. To use it, you need to disable the GPS receiver, point the start of the route and the destination on the map, and then turn on the GPS again. All these operations are described in the instructions for the use of the Prestige 5056. The customer feedback indicates that it is convenient and easy to set the route in this model.