How to tint glass car correctly

Tinting is the simplest and most affordable way,allowing to change the appearance of the car. On the pros and cons are often argued, but the fact that with the right selection of such a film can make cars more attractive and original, they say more and more often. So, let's say, you decided to put a tint film on the glasses of your "iron horse". Where to start, and in general, how to properly tonify the glass, we'll try to figure it out.

Before you buy a darkening cover,find out which glasses can be subjected to a change in light transmission, and which are not. According to the law of the Russian Federation, the shading of the windshield with a film, the coefficient of light transmittance of which is less than 85% is forbidden. In addition, when you get to another country, you obey its laws, so the norms and what and how to tint glass may be different. Before traveling, it's best to clarify this point in order to protect yourself from unnecessary problems abroad.

Suppose you decide to buy a film and doturning your car yourself. The action is really uncomplicated. The material with which you will work, consists of a transparent polyester film (it is attached to the glass), which is specially coated on a metal base. Toning is fixed on the inner (!) Part of the glass, which reduces the likelihood of mechanical damage to the obscuring coating and protects it from various weather phenomena.

Learning how to tint glass, many starttreat this process without due seriousness. Indeed, everything looks pretty simple, but this is only the first impression, but it is deceptive. For a beautiful and high-quality result will have to work.

The procedure for darkening the glasses begins with the fact,that it is necessary to degrease and clean the dirt from the windshield. Do it without regretting the time, since in places where there is even a speck of dust, an air bubble begins to form in a short time, and this leads to the peeling of the entire coating. Do not forget to remove the radio and cellular antennas from the glass. If in this case with the front and side windows everything is quite simple, then the rear will have to suffer. If you are faced with a situation where you do not know how to carefully remove the brake light or damage the heating, and also do not know well how to tint the rear window, it is better to consult a specialist. In this case, the effect will be excellent and long, which everyone desires.

If you managed to visit at least onceprofessional workshop, then for sure you happened to see that the masters are working with the glasses removed from the car. To argue about how to properly tint glass, half-board or do without dismantling is not worth it. Real masters know what they are doing, but the usual car owner, the removal-installation process itself can bring a lot of trouble. From this it follows that we will not shoot anything, and therefore we will use a template. For him, we need a tissue paper. Apply it to the (rear, for example) glass and carefully draw the outline. We cut out, apply the templar to the film and cut off all unnecessary. Now we have a toning that exactly matches the required dimensions.

On how to tint glasses and what to use inquality of the adhesive composition, a lot of information is provided, but the most common way is the one in which soapy water is used. There are several advantages to this solution. First, when the tint is placed on the surface of a glass soaked with such a liquid, it is fairly easy to move around the surface, make the necessary adjustments, etc. Secondly, it is cheap and reliable.

On the issue of correcting the darkening film, inin particular on a large area, the instruction "how to tint the rear window" is also worth adding one more item. Unlike wallpapering, which is compared with toning, many "masters" film, although stretched from the center, but it needs to be done very carefully, since even a small effort can lead to deformation of the entire coating. Pull the film over the tips.

Knowing how to tint glass is not worth itexpect that everything will work out the first time. Keep in mind that it is easier to work with a more expensive film, therefore, the choice should be made not on the principle of "so go away", but it is better to immediately get quality material. It is not afraid of scratches and serves at least 5-7 years longer than cheap analogs. Good luck to you!