Tinting yourself - instruction

Many beginners, and experienced motorists are notknow how to make toning your own hands. In this article, we will consider the main points, and also give a detailed instruction so that everyone can perform the work independently. The whole process is simple, but requires attention and accuracy, so do not neglect the rules about which you will learn. Not everyone wants to give money to hang stickers on the glass, where better to do everything yourself. First, you can be confident in the quality of the work, and, secondly, you will have a personal experience in repairing the car.

It is worth noting that you can not tint damaged glass. If you have a problem with this, you need to contact the workshop where they will be replaced.

Auto tinting is a long process, so you need to carefully prepare for it, you will need:

• The film itself for toning.
• Rubber spatula, which will have to iron the sticker. It is important that its surface is exactly rubber, otherwise it can damage the glass.
• Napkin without lint.
• Detergent.
• Sharp blade or clerical knife.
• Sprayer (can be bought at any hardware store).
• Warm water.

Now you can proceed to the work itself.

Start

Toning with your own hands begins with the fact thatthe glass is thoroughly cleaned and cleaned of dust. It is important that the surface of the glass is necessary on both sides. To do this, apply soapy water on it, then wipe it dry. Next you need to make sure that the glass is absolutely clean, this requires a sharp blade.

Now you can prepare a solution that will helpaccurately place and strengthen on the glass tint. To do this, use shampoo or any detergent. It must be mixed with warm water and beat to a thick foam. Now transfer the resulting liquid to the nebulizer.

Pattern

At this stage, you need to accurately measure the dimensionswindows to cut out the film without the slightest error. You can do it in another way. It is enough to attach a sticker to the glass and cut out the outline. It is important that the cut must first side and bottom, then you can go to the top. Automatic tint with their own hands is almost ready, it remains only to properly place the film on the glass.

Accommodation

So, after you got the finished piecefilm, it must be applied to the glass. To separate the two parts of the film, use a double-sided adhesive tape. Stick it from two sides to different levels, then stretch it in opposite directions. Now attach the film to the glass and adjust strictly to a millimeter. Since the glass was coated with a special tool, the toning will be easily imparted to the movement. Then break the sticker with a rubber spatula.

Toning of other glasses

As it was said earlier, toning your own handsrequires some attention and accuracy. Therefore, first you need to train on the side windows and only then go to the back. In general, the process is no different, but the fact is that the rear window is slightly arched, and this will complicate the application of toning.

</ p>