Industrial grease traps: purpose, scope, installation methods. Fat collectors of the trade mark "Alta Group"

The process of cooking is associated with consumptionoils and fats. As a result, the load on the sewer network increases, and this, in turn, leads to blockage of the pipes. Currently, the supervisory authorities have tightened control and require that public catering enterprises and food producers clean up drains from fats before they enter the sewerage network. Special devices allow this.

Industrial grease trap: introduction

The industrial grease trap is arectangular or cylindrical container made of polypropylene. Inside the tank there are partitions dividing the structure into two or more compartments. In the first chamber large particles settle on the bottom, in the second - the sewage from the fats is purified.

Industrial grease traps are different from domestic,mounted under the sink, efficiency, productivity and large dimensions. As a rule, the device has two types of installation: ground and underground. Installation of the latter is done through a special hatch.

Ways of installation

Above ground grease traps are installed in the basementor outbuildings in view of ease of maintenance and a smooth entrance to the facility. They are connected to an industrial sewerage network. The sludge is pumped out using a sewage machine. For this purpose, the equipment is equipped with special discharge pipes.

Grease trap industrial undergroundIt is installed in the ground vertically, leaving only a technical hatch outside. Horizontal installation is also possible, depending on the features of the sewage network, the volume and other conditions.

Scope of application

These structures are inevitably installed in chemical, cosmetic and food industries:

soap making;
fish;
confectionery;
bakeries;
distillery and other factories.

In addition, the grease trap for industrial sewage is in demand in large catering establishments, where household devices for washing can not cope with their functions.

The frequency of maintenance of these devices dependsfrom the degree of pollution. Terms can be set in the process of operation individually by the consumer. In some designs there is an alarm sensor or an optional automatic system for dumping contaminants from the grease trap.

Company "Alta Group" - manufacturer of grease traps

One of the most popular manufacturers of separatorsfat for home and industrial use is the company "Alta Group". It uses durable and environmentally friendly materials (non-corrosive, ground pressure, weather and aggressive environments) in production and offer a wide range of both ground and underground versions.

Industrial grease traps of the lineupAlta-M-OR have a round design, which makes it convenient to mount them into the soil in concrete rings or directly into the ground, provided that the installation technique is observed.

ALTA M-OR 3.6-240

The grease trap ALTA M-OR 3,6-240 is the mostThe youngest model with compact dimensions and light weight. It cleans drains from fats of non-emulsified nature and from oils with an efficiency of 1 l / s. This model is perfect for use in small catering establishments, where a one-time discharge of effluents does not exceed 240 liters. Also this model can be used in private houses (in the event that there is no desire to put a separator of fat under the sink in the kitchen). Installation has all the necessary certificates SanPiN.

Specifications

The grease trap industrial ALTA M-OR 3,6-240 has the following technical parameters:

weight, kg - 42,0;
diameter of pipes, cm - 11;
efficiency, l / sec - 1;
efficiency, cubic meters / hour - 3,6;
limiting simultaneous discharge, l - 240;
Dimensions, cm - 95.5 • 150.

ALTA M-OR 7-500

Feature grease trap ALTA M-OR 7-500is that he does not need constant tracking and maintenance. This fat separator has a round configuration and is designed for outdoor installation. Such a convenient shape makes it easy to mount it into concrete rings. For greater stability of the installation, industrial grease collectors of this brand have mounting lugs, with which additional fixing to the concrete base is made. The company "Alta Group" can make the device to order the configuration that will be most suitable for installation in concrete rings.

A grease trap ALTA M-OR 7-500 is produced fromsteel low-carbon alloys or polypropylene. These materials are resistant to ground pressure, they are leakproof, do not corrode, are reliable and wear-resistant.

Principle of operation of the ALTA M-OR 7-500 device

The principle of the grease trap is ingravitational floating of fat on the surface. The device has two internal compartments: in the lower one heavy impurities are collected in the drains, and in the upper - thin-layer modules, a container for storing collected fat and pipes.

Industrial grease traps ALTA M-OR 7-500 havethe main advantage, which is the high efficiency of purification of effluents from fats of non-emulsified nature and oils. They account for 99% of all pollutants, and this fact is confirmed by appropriate certificates. The water leaving the plant can be discharged for further purification into a local or central water disposal network.