How to make boat trailers with your own hands?

Unfortunately, in some regions of Russia andIt is very difficult for Ukraine to find a suitable parking lot for boats and boats. Therefore, to be mobile in everything, some owners of these swimming means purchase special boat trailers. However, their cost may not always be available. For such a seasonal "parking" will have to shell out at least 1 thousand rubles, and this is provided that the boat will have a length of less than 4-5 meters. If its length and dimensions are larger, respectively, and the price of the trailer will increase. Therefore, the only way out of the situation will be the independent manufacture of the trailer with the help of improvised materials. So, let's look at how to make a trailer for a boat with your own hands.

Dimension

It is worth considering that when designing a drawing (which isfirst, from which it is necessary to assemble), special attention should be given to the dimensions of the vehicle. After all, if the trailer does not meet the permissible size, it simply will not be registered in the traffic police. And without license plates, you can legitimately confiscate such a "hitch". Therefore, remember the following: the height of the loaded trailer should not be more than 3.8 meters, width - 2.2 meters, and the length of the device together with the tractor (in this case it is a car or an off-road vehicle) - no more than 20 meters. Of course, you ask: "How can you not keep up with this size?" But if your boat is really big (and this is not uncommon today), even if it is a low-load trailer, the overall dimensions will be 4 meters or even more. Therefore, carefully calculate the dimensions of your boat and combine them with the length of the future trailer.

Chassis

Making boat trailers with their own hands,Special attention should also be given to axles and suspension parts. Here, it is necessary to decompose the load onto the supporting structure in such a way that the distribution of the loaded weight of the boat is about 70 percent at the front (ie, where the towbar is) and 30 percent behind. This is done in order to make the movement of the hitch along the road with maximum safety and maneuverability. Judge for yourself: what will happen to the car if the rear of the trailer will account for up to 3 tons of cargo? Then the 500 kg "tail" of your car will simply rise with the towing device, and you can hardly make a move on such a car.

We make boat trailers by our own: frame and body

All the basic and load-bearing elements of the frame mustto be connected exclusively with the help of a welding machine. In this case, do not choose too thick channel, as this will significantly weight the weight of the empty trailer. And this in turn, an additional load on the tires, engine, gearbox, and, in the end, the total fuel consumption. Therefore, if you make boat trailers with your own hands, use lightweight yet robust structural elements.

These were all the main points for whichyou need to pay attention when creating a self-made trailer. Finally do not forget the boat trailers, made with your own hands, install turn signals and parking lights.